User manual MAXDATA ECO 3000X

[. . . ] User Guide - Multimedia Notebook Computer 39 40 Contents IMPORTANT SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 SHIPPING CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 PREPARATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 INSERTING THE BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] - The computer has been dropped or damaged. · Cleaning Never apply cleaning agents directly to the computer. Never use volatile (petroleum distillates) or scouring cleaning agents. 47 Shipping Contents SHIPPING CONTENTS Before you begin installing your notebook, make sure that all components are present. If any item listed in the shipping contents is missing from your computer package, please contact your dealer immediately. · Notebook · Battery · Utility CD · Power adapter · Power cable · User guide · CD or DVD-ROM drive (built in) · Modem cable Please retain the original packaging in case you need to send the device in for repairs or upgrades. 48 Preparation PREPARATION Before first using the computer, make sure you are familiar with the individual components of your system. 1 Catch USB interface i. Link 1394 port Microphone input Loudspeaker / headphones (1) (2) (3) (4) (5) (6) (7) (8) LCD display Status LEDs ON/OFF button Hot keys Keyboard TouchPad and buttons Loudspeaker input Hand rest Fig. 2 49 Preparation INSERTING THE BATTERY The battery is included in the notebook's shipping contents. Now slide the battery into the battery slot in the direction of the arrow until it clicks into place. Make sure that you allow the battery to charge for TWO hours if the computer is switched off, or for FIVE hours if the computer is switched on. It is absolutely essential that the first time you charge the battery you fully charge it. Do not unplug the notebook from the power adapter until the battery is fully charged! Fig. Pull the battery out of the battery slot in the direction of the arrow (2). The basic graphics functions allow you to modify the resolution, color depth, and desktop appearance. If you want to use the additional graphics functions such as TV Out, monitor port, multidisplay, etc. , then you need to install the advanced VGA driver from the Utility CD. You can find more detailed information on this from page 26 onwards in the installation instructions. 52 Power Management POWER MANAGEMENT Your system is compatible with APM and the newer (and more efficient) ACPI energy saving system. Note on PC Cards Never unplug a PC card while the system is in save-to-disk mode. This would deactivate the slot and problems could occur with a modified system configuration the next time you start up the computer HARDWARE (Battery Status & Warnings) After completing the POST (power-on self-test), the battery status display shows the charge state of the battery. Low charge level & SUSPEND When the battery runs low (without the power adapter connected), one of these two protective functions is automatically activated: Without Save-to-Disk If there is no save-to-disk file or partition set up on your system, then current data will be stored in RAM and the system automatically switches into suspend mode. With Save-to-Disk Data is saved in the special file or partition on the hard disk reserved for this purpose. If there is no save-to-disk file or partition available, the system switches into suspend mode. PLEASE NOTE 53 System Overview SYSTEM OVERVIEW LEFT AND RIGHT SIDES Fig. 7 5 9 (1) USB ports (2) Network port (3) Modem port (4) CD or DVD-ROM drive * (5) CD audio volume control (6) Emergency opening mechanism *² (7) CD eject button (8) PC card slot (9) PC card release catch * depending on model *² use a thin object (e. g. a straightened paperclip) Only use if you need to open the CDROM drive without a power supply. Fig. 8 5 (1) Battery (2) Floppy disk drive with eject button (3) Ventilation slots * (4) S/PDIF (optical digital audio) output (5) Power in socket (6) Power and * All air intake and ventilation openings must be kept free from obstructions at all times. 9 5 (1) Kensington lock (2) Ventilation slots * (3) Connector for external monitor (4) S-Video TV output (5) Infrared interface * All air intake and ventilation openings must be kept free from obstructions at all times. [. . . ] Select: <Search for a suitable driver for my device (recommended)> <Next> <Optional search locations> <CD-ROM Drives> <Next><Next><Finish> <Close> You can now close the device manager and the control panel. FAST INFRARED SETTING Your infrared interface has to be optimized manually. Please click in the following order: <Start> <Settings> <Control Panel> <Network> Here, click "IrDA V3. 0 Fast Infrared Port" then click <Properties> , <Advanced> Here, set "Property: Infrared transceiver A" to the setting: "HP HSDL2300" Click <OK> to apply. To activate the new settings you need to restart your computer. 67 Appendix A - Specifications SPECIFICATIONS Processor and Core Logic Intel Pentium 4 processor, FCPGA2 - 478 package 20 KB L1 cache on die (12 KB for core instruction, 8 KB for data) L2 cache on die cache (depending on CPU) 128 KB with Celeron CPU 256 KB with Willamete CPU 512 KB with Northwood CPU SiS chipset with integrated graphics, audio and modem controller 400 MHz frontside bus, PCI / AGP RAM 266 MHz DDR RAM, 2. 5 V PC2100 Memory Expansion Two 200-pin SO-DIMM slots for 128 MB or 256 MB SDRAM modules in any combination up to 512 MB. Display and Video 14. 1 inch XGA active matrix TFT display or 15. 0 inch XGA active matrix (TFT) display. Supported resolution 1024 x 768 with up to 16 million colors SiS 650 with integrated AGP bus 2D/3D graphics accelerator UltraAGP Architecture Graphics Capability (similar to 4 x AGP). [. . . ]