User manual MCINTOSH WK-2W AUDIO KEYPAD AND SENSOR

[. . . ] Installation Guide WK-2 Keypad Introduction The McIntosh Model WK-2 Keypad is designed to remotely operate McIntosh A/V Control Centers, Preamplifiers and Multizone Controllers. [. . . ] 0-9 Numbered Push-buttons Press a Numbered Push-button to operate the optional McIntosh HC-1 Home Controller, select tracks on a CD or Laser Video Disc, Tuner Presets or any numbered operation. Transport Operations Press Stop, Back (back track), Next (next track) or Play to operate a CD player, Video Disc Player or Tape Recorder. System Off Press the Sys Off Push-button to turn Off the entire system including the Local Zone. Installation and Connection The WK-2 Keypad mounts in a standard two-gang wall outlet box and connections are made using a RG59U or RG6 Coax Cable (300ft max. ) with F Connectors at both ends. Connect the Coax Cable between the WK-2 and the F Connector on a McIntosh A/V Control Center, Preamplifier, Multizone Controller or Integrated Amplifier. Up to four keypads can be connected in parallel on the same coaxial line. When the WK-2 is to be connected to a McIntosh A/V Control Center that uses a Five Pin Terminal Connector instead of the F Coax Connector, connect the Center Conductor to Pin 4 and the Shield Conductor to Pin 5. [. . . ] 040015 Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549 McIntosh Laboratory, Inc. 2 Chambers Street [. . . ]