User manual MEDION 42 PLASMA DISPLAY MD 30022

[. . . ] HDMI, the HDMI Logo and High-Definition Multimedia Interface are trade marks or registered trade marks of HDMI Licensing LLC. We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. We will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. We assume no responsibility for the use or reliability of its software on equipment that is not furnished by our company. [. . . ] The setting can be made by means of the MENU Button (Menu) or the VOL-/VOL+ Buttons. The OFF setting usually means normal television operation without a decoder. The decoded picture signal is presented automatically at all other settings. The difference between the decoder settings consists of whether the respective station decrypts the sound additionally or not. Note: Read the instructions for use of your decoder or ask the provider of the encrypted channel for the correct setting. Press the EXIT Button and confirm that you want to store the changes carried out with YES. Note: The settings described above are only necessary in exceptional cases (manual setting of a new station, connection of a decoder, etc. The automatic APSAS station search carries out most of the settings independently. Adjustment: The ADJUSTMENT Menu Point on this channel slot should be positioned at VCR, to avoid picture distortion (conversion to fast time constants), if you want to operate a video recorder through an HF channel slot (connection with aerial cable) or through an AV channel (connection with Scart cable). The setting can be made by means of the MENU Button (Menu) or the VOL-/VOL+ Buttons. Audio channel: The preferred audio channel can be selected with the MENU Button (Menu) or the VOL-/VOL+ Buttons. The device selects the optimum sound setting in accordance with the NICAM priority (a digital sound norm used by some stations) before stereo or mono, independently the AUTOMATIC position. Setting it to MONO can sometimes be advantageous in the case of audio problems on a stereo station. The second language on a dual language station can be selected with DUAL SOUND B. The MONO C setting is only relevant to NICAM stations that broadcast in several languages. Go to the first empty channel slot following the channel slots already stored in the program table with the P+/P-, VOL+/- Buttons. Now enter the channel type and subsequently the channel number or the relevant frequency. Press the EXIT Button and confirm that you want to store the changes carried out with YES. This function is very useful if the range of channels in your reception area (e. An automatic station search, which will store all channels newly added since the last station search, is started. This Menu serves to display the progress of the station search so far. You can cancel the station search at any time with the MENU or the EXIT Button. [. . . ] What software were you using when the error occurred, if you have connected a PC to the device?We warrant to our customers that this product is free from defects in materials and workmanship as follows: for a determined period from the date of original purchase, defective parts or a defective product returned to a repair facility or an Authorized Service Facility ("ASF") for such product, as applicable, and proven to be defective upon inspection, will be exchanged for new or comparable rebuilt parts, or a refurbished product, as determined by the repair facility or the ASF. Limited warranty repair or replacement shall not extend the original limited warranty period of the defective product. This limited warranty does not cover any supplies or accessories, including but not limited to: software, blank media, user-installed drives, etc. [. . . ]