User manual MEDION 5.1 SOUND SYSTEM MD 85263 ACTIVE

[. . . ] 6 SETTING UP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Positioning the 5. 1 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Connecting the 5. 1 System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting the Loudspeakers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · The power supply to your device is interrupted only, when the power plug is removed from the power socket. If you switch off the device using the power switch, then the power feed is not interrupted. · Operate the power adapter only on grounded power outlets with 230V~, 50Hz. When in doubt about the power type at your location, contact the related power utility company. · Do not expose your 5. 1 system, the loudspeakers or any connected devices to humidity. Avoid dust, heat and exposure to direct sunlight to prevent operating failure. 2 SAFETY AND SERVICE · Place and operate all the components on a stable and flat surface, free of vibrations, to prevent the loudspeakers from tumbling. · Only use in a suitable ambient temperature: AMBIENT TEMPERATURE · The 5. 1 system can be operated in an ambient temperature range between 0° C to 40° C and a relative humidity between 20% 80% (non-condensing). When switched off the 5. 1 system can be stored between -4° F and 158° F and at a relative humidity between 20% - 90% (non-condensing). ELECTROMAGNETIC COMPLIANCE · The guidelines for electromagnetic compliance (EMC) must be obeyed when operating the speakers. · Keep a distance of at least three feet from sources of high frequency or magnetic interference (TV sets, other loudspeakers, mobile phones, etc. ) to avoid interference, malfunction and data loss. Service Please contact Medion Customer Care should you experience technical problems with your 5. 1 system. · the device has dropped, fallen or the housing is damaged. Cleaning · Clean the 5. 1 system with a damp cloth. Do not use solvents or aerosol detergents. SAFETY AND SERVICE 3 Package Contents Please check, whether the product is complete and inform us within 14 days of purchase if anything is missing. Your 5. 1 system packaging should contain the following items: · subwoofer with integrated amplifier · 5 satellite speakers (2 x front, 2 x rear, 1 x centre) with connection cables · 3 connection cables (3, 5 mm stereo plug 2 cinch plug) · power adapter (model: CSA-2502200G) · this manual and warranty documents Specifications · Speaker System · Power adapter Active 5. 1 surround sound system CSA-2502200G Input 230V~50Hz 290mA Output 25V~ 2. 2A, 55VA In: · Connections Power connection for power adapter Cinch plugs for: · front right (red), left (white) · subwoofer (red) / centre (white) · rear right (red), links (white) Out: Cinch plugs for: · front right, left · centre · rear right, left 4 SAFETY AND SERVICE CONNECTIONS AND CONTROLS Front of the active Subwoofer 1 2 3 4 (design diagram) 1 2 3 4 - POWER LED indicator - Volume control for main speakers - Volume control for bass / subwoofer - Switch AUX / 5. 1 Input CONNECTIONS AND CONTROLS 5 Rear of the active Subwoofer 5 6 7 8 9 10 11 12 13 14 15 16 6 CONNECTIONS AND CONTROLS 5 6 7 8 9 - Cinch connector for stereo AUX input (e. g. CD-Player) - Cinch connector for 5. 1 input , , Front" - Cinch connector for 5. 1 input , , Rear" - Cinch connector for 5. 1 input , , Subwoofer/Centre" - Speaker connector for Front speakers left 10 - Speaker connector for Front speakers right 11 - Speaker connector for Rear speakers left 12 - Speaker connector for Rear speakers right 13 - Speaker connector for Centre speaker 14 - Fuse (for authorised service personel use ONLY) 15 - Connector for power adapter 16 - ON/OFF switch CONNECTIONS AND CONTROLS 7 SETTING UP With this 5. 1 System you can reproduce surround sound effects. To reproduce these surround effects the following conditions must be met: · the medium (usually DVD film) must support surround sound. Remark: Depending on the movie title surround sound effects may vary in intensity. · the connected source (DVD-player, sound card, etc) must support the required connections and functions. Furthermore, your 5. 1 system must be properly connected and positioned, so that the optimal surround effect can be heard: Positioning the 5. 1 System Position the loudspeakers in such a way, that the audience is in the centre. The two rear satellite speakers have longer cables, so that they can be positioned according to the space in the room: Rear right Rear left Front right Subwoofer Center Front left Loudspeaker Front left Front right Rear left Rear right Centre Subwoofer Description For sound from the front For sound from the back For sound in the centre This position may vary - people cannot locate the source of deep frequencies. 8 SETTING UP Connecting the 5. 1 System Note the instructions in the chapter , , Safety and Service" (pages 2 and following). 1. CONNECTING THE LOUDSPEAKERS After having positioned the components connect the cables of the loudspeakers. Use the drawing on page 6 and the table below as a guide: Loudspeaker Front left Front right Rear left Rear right Centre Loudspeaker plug Cinch black Cinch black Cinch black Cinch black Cinch black Connection on the subwoofer ( p. [. . . ] If the indicators are not lit, then check, whether the 5. 1 system is properly supplied with power. When you are certain, that the supply of power operates flawlessly and that all connections are correct, then switch on the device again. · If the sound is distorted or too low, then adjust the volume controls until the desired volume level is obtained. · If you do not hear any sound, then this could be caused by: · the speakers are without power · the volume control is turned down · sound output is deactivated, muted or faulty (e. g. [. . . ]