User manual MEDION 5.1 SURROUND SYSTEM MD 85499

[. . . ] 8 Connecting the 5. 1 System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting the Subwoofer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting the Power Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Operation and Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When in doubt about the power type at your location, contact the related power utility company. · Do not cover the power supply unit, in order to avoid damage through unacceptable warming. · Stop using the power supply unit if the housing or the feed line to the device is damaged. Replace it with a power supply unit of the same type. SAFETY AND SERVICE 1 · In the first hours of operation, new devices may emit a typical, unavoidable but completely harmless smell, which will decline increasingly in the course of time. We recommend you to ventilate the room regularly, in order to counteract the formation of the smell. During the development of this product, we have made sure that the applicable limits are clearly fallen below. · Do not expose your 5. 1 system, the loudspeakers or any connected devices to humidity. Avoid dust, heat and exposure to direct sunlight to prevent operating failure. · Place and operate all the components on a stable and flat surface, free of vibrations, to prevent the loudspeakers from tumbling. · Only use in a suitable ambient temperature: Ambient Temperature · The 5. 1 system can be operated in an ambient temperature range between 0° C to 40° C and a relative humidity between 20% 80% (non-condensing). When switched off the 5. 1 system can be stored between -4° F and 158° F and at a relative humidity between 20% - 90% (non-condensing). Electromagnetic Compliance · The guidelines for electromagnetic compliance (EMC) must be obeyed when operating the speakers. · Keep a distance of at least three feet from sources of high frequency or magnetic interference (TV sets, other loudspeakers, mobile phones, etc. ) to avoid interference, malfunction and data loss. Service Please contact our Customer Care should you experience technical problems with your 5. 1 system. · the device has dropped, fallen or the housing is damaged. 2 SAFETY AND SERVICE Cleaning · Clean the 5. 1 system with a damp cloth. Do not use solvents or aerosol detergents. Disposal Device At the end of its life, the appliance must not be disposed of in household rubbish. Packaging All packaging and packaging materials that are no longer required can and should be recycled. SAFETY AND SERVICE 3 Package Contents Please check, whether the product is complete and inform us within 14 days of purchase if anything is missing. Your 5. 1 system packaging should contain the following items: · subwoofer with integrated amplifier · 5 satellite speakers (1 x Center, 2 x Front, 2 x Rear) with connection cables · 3 connection cables (3. 5 mm stereo plug 2 cinch plug) · power adapter (model: TEAC-57-252200V, Part No: CSA-2502200G) · this manual and warranty documents 4 PACKAGE CONTENTS Connections and Controls Front of the active Subwoofer 1 2 3 4 (ill. 1 2 3 4 - Total volume Front of the active Subwoofer) - Volume control for bass / subwoofer - 5. 1 Input / Switch AUX - POWER LED indicator CONNECTIONS AND CONTROLS 5 Rear of the active Subwoofer 5 6 7 8 9 10 11 12 13 14 15 [Ill: Rear of the active Subwoofer] 6 CONNECTIONS AND CONTROLS 5 6 7 8 9 - Cinch connector for stereo input - Cinch connector for 5. 1 input , , Front" - Cinch connector for 5. 1 input , , Rear" - Cinch connector for 5. 1 input , , Subwoofer/Centre" - Speaker connector for Front speakers left 10 - Speaker connector for Front speakers right 11 - Speaker connector for Rear speakers left 12 - Speaker connector for Rear speakers right 13 - Speaker connector for Centre speaker 14 - Connector for power adapter 15 - ON/OFF switch CONNECTIONS AND CONTROLS 7 Setting Up With this 5. 1 System you can reproduce surround sound effects. To reproduce these surround effects the following conditions must be met: · the medium (usually DVD film) must support surround sound. Remark: Depending on the movie title surround sound effects may vary in intensity. · the connected source (DVD-player, sound card, etc) must support the required connections and functions. Furthermore, your 5. 1 system must be properly connected and positioned, so that the optimal surround effect can be heard: Positioning the 5. 1 System Position the loudspeakers in such a way, that the audience is in the centre. The two rear satellite speakers have longer cables, so that they can be positioned according to the space in the room: Rear right Rear left Front right Subwoofer Center Front left Loudspeaker Front left Front right Rear left Rear right Centre Subwoofer Description For sound from the front For sound from the back For sound in the centre This position may vary - people cannot locate the source of deep frequencies. 8 SETTING UP Connecting the 5. 1 System Tip Note the instructions in the chapter , , Safety and Service" (pages 1 and following). 1. [. . . ] If the indicators are not lit, then check, whether the 5. 1 system is properly supplied with power. When you are certain, that the supply of power operates flawlessly and that all connections are correct, then switch on the device again. · If the sound is distorted or too low, then adjust the volume controls until the desired volume level is obtained. If you have any questions with regard to these guarantee conditions, please contact us. 14 WARRANTY Liability limitations The contents of this manual are subject to unannounced changes caused by technical progress. [. . . ]