User manual MEDION CD MP3 USB CAR RADIO MD 80947

[. . . ] Card reader (on the upper side of the control panel) OPEN : Open control panel SEL: Press repeatedly to call up the following audio settings: volume, bass, treble, balance, fader; In traffic announcement mode: Press repeatedly for a little longer to call up the various traffic announcement settings During MP3 title search: During MP3 search using letters confirm every entry; MULTIJOG: control dial: adjust selected audio settings (SEL) Display 0 / DSP: number key 0 / switch display mode ENT: confirm selection / LOU: loudness / BND: band selector EQ (Equaliser): press repeatedly to change tone settings PWR: turn device on/off (the device can also be turned on with any other key except OPEN) DIM (tap): dim display USB connection (behind protective cover) RESET opening: reset to factory settings AF/REG: press for a short time to start RDS mode press longer to switch to regional mode REC: record on device connected via USB TA (Traffic Announcement): activate the TA function PTY (Program Type): press once to search for stations from the PTY group "music"; press twice to search for stations from the PTY group "speech"; press three times to turn off PTY 1/ PAU: number and station key 1 / pause play in CD/MP3 mode 2 / SCN: number and station key 2 / scan function in CD/MP3 mode 3 / RPT: number and station key 3 / repeat function in CD/MP3 mode 4 / SHF: number and station key 4 / shuffle function in CD/MP3 mode 5 / DIR : number and station key 5 / MP3 search downwards 6 / DIR : number and station key 6 / MP3 search upwards 7 / MOD: number key 7 / select operating mode Radio CD/MP3 USB ­ Card reader AMS (Automatic Memory Search): automatic saving of stations 8 / TUN/TRK : number key 8 / station search backwards 9 / TUN/TRK : number key 9 / station search forwards Red LED (anti theft protection) CD compartment EJECT: eject CD About these instructions Please read these instructions carefully before using the device. note the warnings on the device and in the operating instructions Store the operating instructions in the car. If you sell or give the car radio away, please ensure that you also pass on these instructions. Keep electrical equipment out of reach of children Never allow children to use electrical devices unattended. [. . . ] In one of the bands FM1, FM2 or FM3 press the SCN button (15) to search the FM band in order to find stations that are broadcasting an AF signal. The scanning process stops for 5 seconds each time it finds a station and then continues. After the search function has found a station press one of the M1-6 (10 15) buttons for around three seconds. The radio will switch back into automatic search mode after a few seconds. You can open one of the saved stations by pressing one of the station buttons 1-6 (14 19). The three frequencies FM1, FM2 and FM3 are searched for the six strongest stations and the stations found are saved in programme spaces 1 6 for each frequency range. Then the station that is saved in memory space 1 in frequency FM1 is played. You can call up the saved stations for the current transmission areas. All stored stations will be played one after another for about five seconds. ⷠWhen you hear the station you want to listen to press the AMS button (21) briefly. In addition to traditional music and voice services they also broadcast additional information in the form of encrypted digital signals and these are analysed and displayed by the car radio. On the display you can now see the programme name and other information (traffic information, the title of the track currently being played, etc. In the AF table in RDS alternative frequencies for neighbouring transmitters with the same programme are constantly being sent out. The receiver constantly checks the quality of the received signal and, if necessary, changes to another frequency. This avoids switching to a frequency which is occupied by a different programme. To switch the regional programme mode on or off hold down the REG/AF button (11) for longer than 2 seconds. To switch on the regional mode wait until the display changes back to the radio display. REG ON: The radio only searches regional stations with traffic announcements. REG ON: The radio only searches stations with traffic announcements outside of the region. Press the TA button (12) for a little longer to switch this function on or off. If the device is in TA mode (TA is shown on the screen) and a CD is playing the radio is switched on immediately if a traffic announcement is transmitted. If the TA function is on during an automatic station search you can use the TUN/TRK/SKIP+/- (22/23) button to save/find only stations that broadcast traffic announcements. [. . . ] Confirm A, B, C, 1 D, E, F, 2 G, H, I, 3 J, K, L, 4 M, N, O, 5 / 10 Next track down P, Q, R, 6 / 10 Next track up S, T, U, 7 V, W, X, 8 Y, Z, space, 9 Select second position 0, _, , + Scroll through all available letters and numbers This device can also play WMA files. You can connect an MP3 player or another data medium to the USB connection on the front of the unit. Search and playback functions for files on an external storage medium work in the same way as for MP3 CD's. ⷠIf the device is in another mode (radio, CD or card reader), you can select USB with the MOD (20) button. [. . . ]