User manual MEDION DIGITAL NOTEPAD P82001 MD 85925

[. . . ] Contents: Safety and service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Operating safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Point of use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The purpose of these instructions is to help you operate your Digital Notepad safely, quickly and easily. Our target group Thank your for purchasing this Digital Notepad. We thank you for your confidence in our products and are pleased to welcome you as a new customer. These instructions are intended for novice users as well as advanced users. Regardless of possible professional functions, this Digital Notepad is intended for domestic home use only. Quality We focused on great features, ease of use, safety and reliability in manufacturing this Digital Notepad. IRELAND HELPLINE 1-800-992508 10 Starting the device Inserting or changing batteries Digital writing block: The Battery Status Symbol on the LCD display [3] will show you the status of the batteries. Open the battery compartment by pressing lightly on the dotted area and pushing the cover upwards. Remove used batteries, if necessary and insert four new AAA batteries in accordance with the following illustration: - +- + + -+ - Note: Pay attention to the correct polarity (+/-). You could damage the digital writing block by inserting the batteries incorrectly. Close the battery compartment again by repositioning the cover and pushing it back to the starting position carefully. However, the actual time will heavily depend on the brand and the quality of the batteries used. UK/ N. IRELAND HELPLINE 1-800-992508 11 Digital pen: If the LED [13] starts to flash or the lines are no longer correctly displayed, the batteries of the digital pen are almost empty and need to be replaced. It will be activated automatically if it comes into the proximity of the entry surface and will switch off when it leaves this area. Remove the used battery and insert a new AAA battery in accordance with the following illustration, if necessary: + 3. Screw the digital pen back together. - Note: Read the notes from Page 5 for dealing with batteries safely. UK/ N. IRELAND HELPLINE 1-800-992508 12 Inserting paper Paper clamp Note: The stack or block of paper must not exceed a height of 13mm (~135 sheets), because the movements of the pen will not be recognized correctly otherwise. The applicable writing area has dimensions of 216mm x 280mm (8. 5" x 11" = letter format). Release the paper clamp, in order to stabilize the paper. Attaching the digital pen You can attach the digital pen to your Digital Notepad when it is not in use by sliding the pen cap on the indentation of the paper clamp. UK/ N. IRELAND HELPLINE 1-800-992508 13 Installation of software Contents of the Software disc: · · · · USB Pen Pad Driver : Necessary for installing the drivers of you Digital Notepad MyInk Suite : Software for administering projects Power Presenter RE : Program to assist working on source files Free Notes & Office Ink : Program for administering and converting Contents of the MyScript Notes disc: · Main program for script recognition. Important: You should install the necessary software (drivers and image processing) first, before you connect the Digital Notepad. Your important files can be changed or deleted during the installation of software. Make sure that you back up your hard disk, to avoid problems when using older files after any installation. Insert the supplied disc labelled "Software" to start the installation automatically. [. . . ] Connect the smaller connector of the USB cable supplied with the device to the USB connection [1] of the device. Push the other end of the USB cable into a free USB connection of your computer. The following indication will appear on the LCD display [3], if the connection has been made: 4. The computer will recognize that a new device has been connected and will allocate two drives to the device. Use as a digitizer tablet You should attach the protective cover for the writing surface supplied with the device with the aid of the paper clip [10], before using the Digitizer Tablet function. [. . . ]