User manual MEDION DISNEY TV PRINCESS MD 3722

[. . . ] To avoid injury to the eye, do not manipulate or damage the safety system of the unit. Cleaning the unit Always disconnect the AC mains plug before cleaning the unit. Do not apply chemical solvents or cleaning agents, as they may damage the surface and/or labelling of the unit. Audio-CD- Aufbau Data on an audio CD is divided into sections called "tracks", each of which is given a track number: This DVD player plays DVD-video and audio CDs including MP3CDs. [. . . ] Insert two "AA" batteries, with each one oriented correctly. Be sure to turn off the power to all components in the system before connecting another component. If necessary, refer to the user's manual of the TV, stereo system or other components connected. Be sure that the colours of the jacks and plugs match up when using video/audio cables. Be sure to keep the player connection cables separate from the TV antenna cable when you install the player, because it may cause electrical interference when you are watching television programs. Do not place TV on top of this DVD player, unless it is the compatible Medion TV set "MD 3723" or "MD 3721". The easiest connection between the TV and DVD, which at the same time provides an very good picture, is the SCART cable (included). Alternatively, you may use a S-VIDEO OUT cable together with an AUDIO cable to output the sound. In order to output the sound on a stereo system, connect the DVD as shown here: To connect the DVD to an Amplifier equipped with digital input jacks, such as MD deck or DAT deck, use an audio coaxial digital cable for the audio connections: Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. 1 channel Dolby Digital surround format, the DVD player outputs a Dolby Digital or MPEG data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the player up to a Dolby Digital or MPEG decoder, you can enjoy a more convincing, realistic ambience such as can be heard in movie theatres. Now all pictures will appear subsequently for some seconds ("slide show"). In order to access the first folder (or the folder on the highest level), press "001" with the numerical buttons. The repeat mode changes with each pressing of the button as as follows: REPEAT ONE (repeat current track) > REPEAT FOLDER (repeat the current group) > repeat off) > etc. A appears briefly Press REPEAT A-B A B again at your chosen end point. NOTES: The repeat A-B section can only be set within the current title (DVD) or track (CD). In the STOP-mode, press SETUP There are two main setups: Quick Setup Navigate in the menus Use the arrow keys or to select one of the main setups. Select one menu item (submenu) with or and confirm with OK to open the submenu. In the submenus, select an item with or and confirm with OK to edit this setting. Set to ON to compress the range of sound volume, that is to reduce loud passages and enforce quiet passages ("night setting"). DOWN SAMPLING Setting ON: If the digital coaxial output is used, ("home theatre"), media coded with a frequency of 96 kHz will be down-sampled to 48 kHz. Parental PASSWORD When asked to enter a password for the first time, enter a four-digit number with the remote control. [. . . ] PLAYER MENU Select a language for the player menu (On-Screen-Display): English, French, Spanish, German, Dutch, Italian, Swedish, Danish, or Portuguese. tV ASPECT 4: 3 Pan & Scan: A 4:3 TV displays the picture in full height , but crops it at the sides. 4: 3 Letter Box: A 4:3 TV set shows a 16:9 picture with black bars at the top and bottom 16:9 WIDE: Selection for TV with 16:9 format. DOLBY DIGITAL ON (default setting): Must be selected when the player is connected to a Dolby Digital Decoder. [. . . ]