User manual MEDION DVD RECORDER MD 80032

[. . . ] 25 25 25 26 27 27 27 29 29 29 30 31 31 31 32 32 32 33 33 33 34 34 PREPARING DISCS FOR RECORDING . 45 DVD-RECORDER 80032 3 SAFETY INFORMATION About this manual Please read these instructions carefully before use. If you sell or give the device away, make sure you also hand over this manual. Electrical equipment does not belong in the hands of children. Never allow children to use electrical devices unattended. The appliance and the batteries should, therefore, be kept out of the reach of children. [. . . ] keys, press PLAY key to view to ro- When playing JPG files, use key to rotate picture clockwise, or use tate picture counter-clockwise. Edit play list Move cursor to desired JPG file using ected file. keys, press ENTER key to mark sel- After all desired files have been marked, then move cursor to "Add" icon using and keys, press ENTER key to add selected files to play list. Or simply move cursor to "Add All" icon and press ENTER key to add all files on disc to play list. DVD-RECORDER 80032 23 KEY FUNCTIONS Move cursor to "Slide" icon, then press ENTER key to start picture slide show. Move cursor to "Speed" icon can adjust time delay between each frame by pressing or keys. Delete play list Move cursor to "Play List" icon and press ENTER key to switch to play list mode Under play list mode, move cursor to "Del All" icon and press ENTER key to delete current play list. Press to go back to the play list menu. 24 SETTINGS AVAILABLE IN THE SETUP MENU Entering the Setup Menu Press SETUP on your remote control to enter the setup menu. It will resume when you exit the Setup menu. How to Setup Press SETUP to enter the setup menu. Press to enter into second sub-menu, or press to return to the previous page. buttons to make a selection and press buttons to make a selection and press to enter into the first Press SETUP again to exit the setup menu. System menu There are three items that can be set from the System menu: Guide Language, Set Time and Factory Reset. Guide Language Determines the language displayed on the On Screen Display (OSD). The OSD can be displayed in English, Spanish, French or Chinese. Set Time Determines the system time. The correct time can be entered manually or automatically. Factory Reset Will restore the DVD recorder setting to the original factory setting. Video menu There are four items that can be set from the Video menu: TV Input, Channel Scan, Add/Del Channel and Screen Format. TV Input Select C A T V if you have cable television, otherwise choose TV if the unit is connected to an antenna. Channel Scan Select S T A R T to start automatically searching for stations. DVD-RECORDER 80032 25 SETTINGS AVAILABLE IN THE SETUP MENU Add/Del Channel Allows you to add/delete specific channels. Move cursor to desired channel; press the ENTER key once to add the channel and again to delete the channel. You can also access this menu by pressing the PROGRAM button. Screen Format 4:3 Letter Box Select this setting to display a 16:9 format film on a conventional 4:3 television. The picture will be displayed full-width, with black bars on top and bottom. 4:3 Pan Scan Choose this setting to display transmissions in conventional 4:3 format on a 4:3 television. Transmissions in 16:9 format will be displayed full-height (without black bars) but with the sides cut off, however the sidebars of the image will be cropped to fit your screen. 16:9 Wide This is the setting for output on a wide-screen television in 16:9 format. Audio menu Use this menu to ensure the audio output format is compatible with connected devices (amplifier/receiver or TV set). Dolby Digital PCM: Recorder can output PCM data and play the same audio format as on CDs. Additionally, 2-channel analog audio will output from the amplifier's audio output jacks. Bitstream: Recorder outputs raw data of Dolby® Digital soundtracks DTS PCM: Recorder can output PCM data and play the same audio format as on CDs. Additionally, 2-channel analog audio will output from the amplifier's audio output jacks. Bitstream: Recorder outputs raw data of DTS® soundtracks MPEG PCM: Recorder can output PCM data and play the same audio format as on CDs. Additionally, 2-channel analog audio will output from the amplifier's audio output jacks. Bitstream: Recorder outputs raw data of Dolby® Digital soundtracks Sampling Freq. This DVD recorder provides selections of 48KHz and 96KHz 26 SETTINGS AVAILABLE IN THE SETUP MENU Security menu Use directional keys to move cursor and press enter key to confirm change. [. . . ] Condensation may have formed; allow one or two hours for the recorder to dry out. Check that the batteries are not flat and that they are correctly inserted. Ensure that there is no obstruction between the infrared transmitter of the remote control and the sensor on the recorder. Are the cables between the recorder and the TV are correctly connected and undamaged? [. . . ]