User manual MEDION FOOD PROCESSOR MD 41549

[. . . ] Avoid any external heat influence for example due to heaters, gas or electric cookers. CLEANING AND MAINTENANCE Never immerse the unit in water or other liquids. Use warm water only, with trade standard washing-up liquid, for cleaning the accessories. AC POWER SUPPLY Connect the mains cable always to a mains socket 230V ~ 50Hz which is easily accessible. [. . . ] Finally, fit the cover with the pusher and snap this into place by turning (note marking). Set the food processor to the required performance level (note the table on page 10). After the motor has come to a complete standstill, remove the cover with the pusher by turning and lifting off. Release the work bowl by turning and use the spatula to fill the dough into another container for further processing. -6- Food-processor_MD41549_EN-Delta. FH11 Fri May 07 13:51:43 2004 C M Y CM MY CY CMY K Seite 7 The dough blade Using the dough blade, you can stir different cake doughs and knead bread doughs. Then place the dough blade onto the drive axle until it snaps into place audibly. When making a dough, it is recommended to fill in first the dry ingredients (flour, sugar, or similar) and then the other ingredients (eggs, fat, milk, or similar). Finally, fit the cover with the pusher and snap this into place by turning (note marking). Set the food processor to the required performance level (note the table on page 10). After the motor has come to a complete standstill, remove the cover with the pusher by turning and lifting off. Use the spatula to fill the dough into another container for further processing. Pusher Screw the lid onto the motor aperture until it snaps into place audibly. Turn in clockwise direction until the nose snaps into place audibly in the guide rail. The engagement markings must match! Guide rail P 0ff 1 2 3 45 The engagement marking must match!OTHERWISE NO FUNCTION -7- Food-processor_MD41549_EN-Delta. FH11 Fri May 07 13:51:43 2004 C M Y CM MY CY CMY K Seite 8 The slicing/shredding discs Using the slicing/shredding and grating discs, you can process different types of vegetables, potatoes, and fruit. Please note the different ends of the disc insert at the one end a hook, and at the other end a "nose". Then press down the end with the "nose" until this snaps in and the disc insert is firmly connected with the disc. Engage insert Press insert into the disc holder, until it snaps in audibly. Set the food processor to the required performance level (note the table on page 10). Now push the required ingredients exclusively with the pusher into the work bowl. Pusher Nose Screw the lid onto the motor aperture until it snaps into place audibly. Turn in clockwise direction until the nose engages audibly in the guide rail. The engagement markings must match! Place disc holder onto disc holder shaft. Guide rail P 0ff 1 2 3 45 The engagement marking must match! [. . . ] After the motor has come to a complete standstill, you can remove the blender and fill the contents into a corresponding container (pot, carafe, or bowl). Close lid by turning in an anticlockwise direction. Screw blender in a clockwise direction onto the motor aperture, until it engages audibly. P 0ff 1 2 3 45 -9- Food-processor_MD41549_EN-Delta. FH11 Fri May 07 13:51:43 2004 C M Y CM MY CY CMY K Seite 10 Application examples Recommended quantity* Recommended performance Accessories Operating time Dough preparation: Batter Shortcrust pastry Yeast dough 250 g flour* 200 g flour* 500 g flour* 4-5 3 3 Dough blade Dough blade Dough blade approx. Puréeing: Raw and cooked vegetables 3-5 Blending: Milk shake 1-3 Blender approx. Chopping: Meat (raw) (first cut into cubes) Nuts 4-5 Processing blade approx. carrots, cucumbers, onions, potatoes, or similar) Slicing, shredding or grating disc approx. [. . . ]