User manual MEDION LCD TV MD 30039

[. . . ] Read these instructions carefully under all circumstance and follow all the instructions listed. You will guarantee the reliable operation and a long life expectancy of your LCD TV in this way. In the event that you transfer ownership of this LCD TV, please provide these instructions to the new owner. The service address on the back of these Instructions for Use) if problems with your LCD TV arise. [. . . ] You will need a component cable (not in the scope of the delivery) for this connection. You will need a SCART cable (not in the scope of the delivery) for this connection. Camcorder), the sound of which you want to transmit through the LCD TV, here. DVD player, video recorder, SAT or DVB-T receiver, games consoles, etc. You will need a SCART cable (not in the scope of the delivery) for this connection. The connections are on the side in the case of the 20" LCD TV and at the bottom of the back in the case of the 19" and 22" LCD TVs. Alternatively, you can connect the LCD-TV and the video recorder with a SCART cable. Apart from this, connect the aerial cable as described in the `Video recorder' section (see above). If your computer has a SCART, or Video output, you will be able to transmit the computer display by means of one of these connections. Note Only choose one possibility, in order to avoid problems with the signal allocation, even if your computer offers several connection possibilities. You will shift between the TV, AV, SVIDEO, SCART and PC sources of reception with the directional keys. Directional keys for navigation within the Menus OK - You will have to confirm your selection with this button in some Menus. Teletext buttons: PGUP = Teletext previous page PGDW = Teletext next page TXT = Switch video text on/ off INDEX = index page SIZE = Enlarge video text REVEAL = Show concealed text SUBPAGE = sub-page CANCEL = Fade video text out 13. INFO: For displaying information, such as the current channel number and the picture format. Number keys Television mode: channel selection; Teletext mode: Entry of the three-digit numbers, with which the page is selected. Note Read the Safety Information Chapter from Page 1 ff under all circumstances before bringing the device into operation. Please keep the packaging material well and use it exclusively to transport the television. Install two AAA size, type R03 batteries according to the correct polarity (marked in the battery compartment). Remove the batteries from the remote, if the device will not be used for a longer period. Connect the aerial socket and the television device to the RF IN connection with a doubly screened aerial cable (not in the scope of the delivery) for the connection to the external aerial or the cable plant. Connect the mains connection cable supplied with the device to a well accessible 230 V ~ 50 Hz mains socket. The device will go into the standby mode and the display on the front will shine red. [. . . ] Setting the balance between the left and the right loudspeakers (0 ­ 100). A blue screen will be displayed, if no signal is received in the case of a channel, if this option is set to ON. You will be able to change the language setting to EAST, RUSSIAN, ARABIC or FARSI if you live in a language area with a different alphabet. NORMAL, WARM, COOL, USER The colour intensity can be set individually by means of the RGB values in the case of USER. [. . . ]