User manual MEDION LCD TV MD 30325

[. . . ] Furthermore, you will find useful information regarding troubleshooting on page 21 of this manual. Purpose of use â· This device serves to receive and transmit television channels. The different connection possibilities (receiver, DVD player, DVD recorder and VCR, etc. This device is not suitable as a data monitor for office workstations. [. . . ] If by any chance, the batteries are swallowed, consult a doctor immediately. Your hands and fingers may be injured, or the liquid of the battery may get into your eyes or adhere to your skin. If this happens, rinse with a large quantity of water immediately and consult a doctor. Do not expose batteries to strong impact by dropping or throwing the batteries. do not reverse the positive (+) and negative (-) terminals to avoid short-circuit. Remove the batteries from your device if it is not to be used for a longer period. Clean the battery and device contacts, if necessary, before inserting batteries. Get to know the device Function Call up the OSD1 menu with this button, in order to make changes on your device. You will change between the TV, AV, SVIDEO, SCART and PC reception sources with the CH +/CH - buttons. Put the device into operation while switched off; While switched on: switch to the Standby Mode. Get to know the device 7 You will need an S-VHS cable (not in the scope of the delivery) for this connection. Turning the LCD TV on and off You will switch the device back to the Standby Mode with the STANDBY button. Select the options from the sub-menu with the / / directional buttons. Confirm the option selected from the Main Menu and open the sub-menu with the Confirm the option selected from the sub-menu in which you want to make changes or settings with the tional buttons. Set the required vale or make a different selection with the / directional buttons. You will close the Menu and confirm the selection at the same time with the EXIT button [7]. A new menu with the selection of the colour norm (BG/DK/I or SECAM L/LL) will direction button. Select the colour corresponding to corresponding to your country with the 6. Note You will be able to change the sequence of the channel positions according to your requirements. Read how you can sort the channels under the CHANNEL SWAP Menu point in the in the `CHANNEL Menu' section from Page 18. The channel search will be made by means of the respectively connected device, in the case of devices connected through SCART or Composite. Press either one of the CH+ / CH- buttons on the device or one of the CHANNEL buttons [11] on the remote, or select the channel directly by means of a number key, in order to select a channel. [. . . ] Store the test signal on channel position 0 (this channel position will not be occupied by a television channel), when the signal has been found. A blue screen will be displayed, if no signal is received in the case of a channel, if this option is set to ON. You will be able to change the language setting to EAST, RUSSIAN, ARABIC or FARSI if you live in a language area with a different alphabet. NORMAL, WARM, COOL, USER The colour intensity can be set individually by means of the RGB values in the case of USER. [. . . ]