User manual MEDION LCD TV MD 41427

[. . . ] Trademarks: MS-DOS® and Windows® are registered trademarks of Microsoft®. We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. We will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. We assume no responsibility for the use or reliability of its software on equipment that is not furnished by our company. [. . . ] At the same time, attention should be paid that that the display bar of the 2nd TUNING Menu Point is positioned in the center, because the station is set optimally then. You can also enter the reception frequency directly with the number Buttons by pressing the MENU Button. Channel grid: The channel grid can be changed with the MENU Button (Menu) or the VOL+/VOLButtons. The channel grid represents the setting of the channels to the frequencies available and can vary according to the location (e. Channel type: The channel type can be changed with the MENU Button (Menu) or the VOL+/VOLButtons. It is possible to select between channels and special channels or special channels in individual states (e. g. Channel number: You can enter the channel number of the channel slot that you require directly here. You can increase or decrease the current sound channel number with the VOL+/VOL- Buttons. A cursor will appear and you will be able to enter the channel number directly with the number Buttons when you press the MENU Button. TV Standard: The TV standard can be changed with the MENU Button (menu) or the VOL+/VOLButtons. Settings related to the transmission norm (location-dependant) of a station can be made here. 20 ENGLISH Decoder Setting Off External/Internal Sound External Sound Internal Sound Station/Sound Decrypted Analog Nicam Analog Nicam Analog Nicam Encrypted Decrypted Encrypted Encrypted Decrypted Decrypted Station/Picture Decrypted Encrypted Sound Output Source TV Analog Decoder NICAM TV Analog Decoder NICAM Decoder Analog TV Nicam TV Picture Presentation of TV Decoder Português Encrypted Decoder 13. Press the EXIT Button and confirm that you want to store the changes carried out with YES. Note: The settings described above are only necessary in exceptional cases (manual setting of a new station, connection of a decoder, etc. ). The automatic APSAS station search carries out most of the settings independently. 8. TV MODE ADJUSTMENT 21 Suomi Norsk Svenska Note: Read the instructions for use of your decoder or ask the provider of the encrypted channel for the correct setting. Dansk Encrypted Decoder Español The OFF setting usually means normal television operation without a decoder. The decoded picture signal is presented automatically at all other settings. The difference between the decoder settings consists of whether the respective station decrypts the sound additionally or not. The following Table is intended to explain the connections. Italiano 12. Decoder: This setting is important for the operation of a decoder on the SCART/AV2 socket, in order to be able to receive encrypted stations. The setting can be made by means of the MENU Button (Menu) or the VOL+/VOL- Buttons. Français 11. Adjustment: The ADJUSTMENT Menu Point on this channel slot should be positioned at VCR, to avoid picture distortion (conversion to fast time constants), if you want to operate a video recorder through an HF channel slot (connection with aerial cable) or through an AV channel (connection with Scart cable). The setting can be made by means of the MENU Button (Menu) or the VOL+/VOL- Buttons. Nederlands 10. [. . . ] Replacement or repaired products may contain remanufactured parts equivalent to new in performance or may have been subject to incidental use. Out-of-Warranty Support In addition to providing free technical support during the warranty period, We are also available to support your product after the warranty period has ended. This out-of-warranty support will be provided on a fee basis. Norsk Svenska Dansk Português Español Italiano Français Nederlands English Deutsch WARRANTY PIXEL ERRORS WITH LCD TVS Active matrix LCDs (TFT) with a resolution of 1280 x 720 pixel (WXGA), which are in turn composed of three sub-pixels each (red, green, blue), contain about 2. 4 million addressable transistors. Because of this very high number of transistors and their extremely complex production process occasionally defective or incorrectly addressed pixels or sub-pixels may occur. [. . . ]