User manual MEDION MD 41530 30 LCD DISPLAY

[. . . ] Trademarks: MS-DOS® and Windows® are registered trademarks of Microsoft®. We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. We will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. We assume no responsibility for the use or reliability of its software on equipment that is not furnished by our company. [. . . ] FIRST TIME INSTALLATION 21 Türkçe Português ENGLISH UNITED KINGDOM PAL B/G AUTO Español Dansk 5. Press the POWER button to switch the set on. Nederlands Français Italiano English Deutsch 7. GENERAL CONTROLS & ADJUSTMENT TURNING THE LCD DISPLAY ON AND OFF Your LCD-TV offers you different possibilities for switching it on. or Press the button of the respective signal source on your remote (TV, AV/SV, SCART 1, SCART 2 or PC). You will switch on the LCD-TV and select the signal source at the same time with this. Use the POWER button to switch off the LCD-TV. SWITCH BETWEEN TV / PC / AV 1. Press the SCART 1 and SCART 2 buttons to switch on the automatic recognition of the SCART (Video / S-Video / RGB) mode by the system. You can switch between video, S-video and Auto by pressing it several times. SCART 1 also supports RGB. You can also select the signal source with the assistance of the SOURCE button on the LCD-TV. 22 ENGLISH SWITCHING TV CHANNELS 1. You will switch up and down between the channels in your channel table with the P+/P- buttons. You can select the required channel directly with the assistance of the number block on the remote. Press the RTN button if you want to call up the channel viewed most recently. VOLUME CONTROL USING VOLUME CONTROL Press VOL-/ VOL+ button to turn up or turn down the sound volume. USING MUTE At any time, you can temporarily turn off the sound by pressing the MUTE button. Press the MUTE again or VOL- / VOL+ button to turn the sound back to the previous level. Note: The mute function is automatically turned off if VOL- / VOL+ is pressed. SETTING THE SLEEP TIMER You can set the Sleep Timer to automatically turn off the TV view of LCD display. Press the SLEEP button repeatedly to change the sleep time (in minutes). The time can be set to 30-minute increments from 30 minutes to 90 minutes. Note: The Sleep Timer screen automatically disappears in 3 seconds. 7. GENERAL CONTROLS & ADJUSTMENT 23 Türkçe Português Español Dansk Nederlands Français Italiano English Deutsch VIEWING THE MENUS AND ON-SCREEN DISPLAYS 1. The main menu appears on the screen. PICTURE COLOR TEMP SOUND TV MONITOR RESET MODUE INPUT :SELECT :ADJUST 2. Use the P+ / P- button to select one of the menu options, and then press the MENU button to access to the Sub-menu. Press the EXIT button to return to the previous screen or select END and confirm with MENU button to leave the Menu. Note: The menu varies with which input source is selected. 24 ENGLISH CONTRAST AND BRIGHTNESS SETTINGS You may need to perform separate adjustments for brightness and contrast for the different video modes. To set the brightness: select the BRIGHTNESS menu point and press the VOL+/VOL- buttons to increase or lower the screen brightness. To set the contrast: select the CONTRAST menu point and press the VOL+/VOL- buttons to increase or lower the screen contrast. This function locks the LCD-TV to prevent unauthorized access. Enter a four-digit PIN through the remote and confirm it with the MENU button. [. . . ] Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT AS LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT OR MODIFY AND ARE IN ADDITION TO THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE OF THIS PRODUCT TO YOU. Please note the following: Be sure to keep your purchase receipt in a safe place. Our company, at its option, may require a copy of the receipt to validate the warranty period effective date (i. e. [. . . ]