User manual MEDION MD 42666 FLATBED SCANNER

[. . . ] USB COLOUR FLAT BED SCANNER Copyright © 2004 All rights reserved. Trademarks: MS-DOS® and Windows® are registered trademarks of Microsoft®. Medion® makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Medion® shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. [. . . ] Confirm by clicking on "Continue Anyway". 10 SETUP Française OPERATION Make sure the software installation has been completed successfully. SCANNING 1. The top of the original should be positioned towards the front end of the scanner with the surface to be scanned facing down. LAUNCH SCANWIZARD To launch ScanWizard, double-click the ScanWizard icon on your desktop. By default, the scanner will detect the settings (under Original, Scan Type, and Purpose), and automatically performs a "fast preview" of your image based on those settings. 1. To launch ScanWizard 5, double-click the ScanWizard 5 icon on your desktop. You can use the following tool buttons to change the settings according to your preferences: Original Scantype Purpose defines the category of the original (scan material). Scan Type ­ selects the output image type (colour, gray, or B&W). defines the image resolution to match your target application. NOTE: Click the Scale Output, Adjust, and Reset buttons if you need to make further adjustments. 12 OPERATION 2. When the "Save As" dialog box appears, specify the folder location, a file name, and the format for the output image, then click "Save". Note: Send image to application after saving: If this option is checked, the scanned image is saved first, then automatically delivered to an image-editing application, an e-mail editor, or a web browser as indicated in the destination box. Française English Nederlands SCANNER BUTTON CONTROLS Cancel/ Setup Scan Copy E-mail OCR Scan-to-Web Custom Dansk Español The Scanner is equipped with seven scanner buttons, providing quick access to the most frequently used functions: Cancel/Setup Launches the configuration utility when the scanner is not scanning. Scan Captures images that can be saved as files or sent to an image-editing application. Copy Scans the image and sends it to your printer. Deutsch OPERATION 13 E-mail Scans the image and delivers it directly to your email application. OCR Scans a text document, converts, and saves it in text file format. Customises the Power Saving, Scan, Fax, and Launch Application functions according to your requirements. The parameters for each button can be set through the Scanner Configuration (SC) utility. To launch the Configuration Utility, simply press the Cancel/Setup button on your scanner or choose it from your computer. FOR MORE HELP If you experience problems with installation, refer to the Troubleshooting file in the Techinfo folder on your CD-ROM. For more information on operating your scanner with ScanWizard, launch your Internet browser to view the software manual (in HTML format). Alternatively, you can also view the same manual directly from your CD-ROM. 14 OPERATION SCANNING SLIDES AND FILM NEGATIVES Française English Nederlands The Transparency Adapter is an accessory included with your scanner. It gives you the ability to scan 35mm slides and film negatives on your flatbed scanner. We recommend the use of this accessory to scan slides for on-screen display purposes or where high resolution is not critical. Please note: Scanning of colour transparencies may vary, depending on the quality of your film original. CONNECTING THE TRANSPARENCY ADAPTER Dansk Español 1. Remove the scanner lid and connect the Transparency Adapter to your scanner. To do this: Connect the 15-pin connector (A in diagram) of your Transparency Adapter to the accessory port (B) at the back panel of your scanner. Deutsch OPERATION 15 MOUNTING A 35MM SLIDE OR FILM NEGATIVE Mount the slide Turn the Transparency Adapter over. [. . . ] Under certain circumstances an error message may be displayed in certain word processing programs. However, optical character recognition still functions. 24 SERVICE TECHNICAL SUPPORT This flat bed scanner has been vigorously tested in our laboratories in conjunction with a wide variety of devices and peripherals. However, it is not unusual, that drivers are updated from time to time. This is due to possible compatibility problems with other components, programs and equipment not yet tested with the flat bed scanner. [. . . ]