User manual MEDION MD 5345 FLATBED SCANNER

[. . . ] 4 The USB Scanner Utility Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Chapter 2 Using the USB Scanner Utility 6 6 Scan Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Copy/Print Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Custom Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Refer to Troubleshooting for more information. Clicking a button opens the associated application. Clicking Preferences enables you to set preferences for each application. 4 The USB Scanner Utility Interface The following table describes the function of each button on the USB Scanner Utility interface: Scan Button: Click to scan documents and images. You can change the default post processing application by clicking Preferences and selecting a different program. Copy/Print Button: Click to send a scanned image or document directly to a printer or printer application. Custom Button: Click to send a scanned image or document directly to a pre-selected application. OCR Button: Click to convert a scanned item to black and white text for use with word processing software. E-Mail Button: Click to send a scanned image or document directly to an e-mail program. You can add and choose settings for post processing applications, set scanner status display options, and set advanced properties such as image mode, color control and resolution. The next chapter describes how to use each function in detail. 5 Chapter 2 Using the USB Scanner Utility This chapter will describe each function in detail. Scan Function Use the Scan function to scan images or documents and send them to the TWAIN Interface for image post processing. Place the item face down on the scanner, with the corner of the paper next to the arrow, as shown: 2. Make any required adjustments to the Scanner Settings and Scan Configuration, and then click Scan. By default, the TWAIN interface will be disabled and you will NOT see the TWAIN dialog box. Instead the image will be directly loaded into your processing application. For more information on enabling or disabling the Twain interface, please see the Advanced Properties Window on page 15. Also note, you may need to wait up to ten seconds for the processing application to load. Note: For information on setting the TWAIN interface options, refer to the TWAIN interface online help. Note: You can set the post processing application that the TWAIN Interface sends the image to. Please refer to the Preferences section for more information about settings. 6 Copy/Print Function Use the Copy/Print function to scan images or documents and send them to the printer. Place the item face down on the scanner, with the corner of the paper next to the arrow, as shown: 2. In Windows, double-click the USB Scanner Utility icon in the Windows taskbar. Click the Copy/Print button on the USB Scanner Utility interface. 4. Note that you must wait at least ten seconds for the Print dialog box to load. Note: By default, the image is scanned directly to the selected printer without opening the TWAIN Interface. 7 5. Click Print to print out the scanned image, or click Cancel to returned to the Scanner Utility Print dialog box. Select Picture Position. [. . . ] (3) USB cable is properly connected from the scanner to your PC. 18 Displayed if there is a problem communicating with the scanner. May be caused by power outage, misconnection or an installation problem. Please check your connections and check that your wall socket and power switches are all turned on. Problems in TWAIN The TWAIN window does not appear after choosing Acquire. Make sure all connections are secure and correct. Check your connections (see Problems with connections above). Unable to scan to application software. Check that the scanner is selected in the Select Source dialog box. [. . . ]