User manual MEDION MD 82157

[. . . ] In case the unit has to be disconnected quickly, the plug has to be within easy reach. Do not carry out any repairs If the AC adapter, the connecting cable or the device is damaged, immediately disconnect the AC adapter from the power outlet and contact the customer service. Refer all servicing to our Service Centre or to another qualified workshop. When absent for a long period of time or during a thunderstorm, pull out the AC adapter. [. . . ] The settings are lost when the receiver is disconnected from the mains. You can successively set the time, date and time zone via the key is pressed, the function which is desired to be set flashes for approx. To confirm a setting, just wait until the display does no longer flash (the display switches back to clock display) or press MODE to go to the next function. english 15 Polski Portuguese Deutsch MODE key, and interrogate the world time. Hold one of the keys down for a few seconds for quick time adjustment forwards or backwards in steps of ten minutes. If a summer time correction is necessary, it can be set together with the time zone setting (see below). Hold one of the keys down for a few seconds to change the date forwards or backwards in steps of ten days. Su = Sunnday Mo = Monday Tu = Tuesday We = Wednesday Th = Thursday Fr = Friday Sa = Saturday The display for the days of the week will also run automatically. The day of the week is displayed with two letters for the English names of the days of the week. Press the MODE key once again or four times from the beginning, to see the world time (GMT). Press MODE once to confirm the current setting and it switches to select the area for MW. When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to auto-run mode autmatically. The following table gives an overview of the city name abbreviations for the time zones, and the time adjustment. You can choose which data are indicated in the display if the radio is switched off. español Polski 19 Portuguese Deutsch English With the system stay in clock display mode and the Radio is OFF , press FINE once. Mode of display Clock only Clock + Local LCD , , CLOCK" goes solid only , , CLOCK" + , , LOCAL" go solid , , CLOCK" + , , DATE" go sold "CLOCK" +"DATE" + "LOCAL" go solid The world receiver provides two independent wake-up times ALARM 1 and For each one you can set and whether you want to be waked up by a buzzer or by the radio. Whether the unit should wake you only on Monday to Friday or only on Saturday and Sunday; The currently set waking time flashes for about ten seconds in the display (at start-up: 0:00 AL1 or AL2) together with the days of the week (abbreviations of the English names of the days, see above). While the time is still flashing, press UP or DOWN to change the waking time to earlier or later in steps of one minute. [. . . ] Press the selected key once for the preset memories A, B, C or twice in short succession for the preset memories A1. The selected preset memory place is shown in the display with the suffix MEM. The settings are lost when the receiver is disconnected from the mains. Selecting a station from the memory To select a station directly from the memory, switch to the corresponding frequency band and press the memory keys A, B or C once for the preset memory A to C or twice for the preset memory. [. . . ]