User manual MEDION PC MULTIMEDIA SPEAKER MD 85257

[. . . ] 1 Ambient Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Electromagnetic Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Printing errors might occur. ii SAFETY AND SERVICE Please read this chapter carefully and follow all instructions. In doing so you will ensure the reliable operation of and a long life cycle for your multimedia active loudspeakers. Store the manual safely; so that you can pass it on to the new owner should you sell your multimedia active loudspeakers. OPERATIONAL SAFETY · Never open the housing of the multimedia active loudspeakers or the power adapter!There is life threatening danger by electric shock, if the housing of the power adapter is opened. · Children should never play unattended with electrical equipment. · These loudspeakers are not designed for operation in a heavy industry environment. LOCATION Follow these instructions to connect your multimedia active loudspeakers properly: A power outlet must be close to the device and easily accessible. The power feed to your device is interrupted only, when the power plug is removed from the power outlet. If you switch off the device using the power switch, then the power feed is not interrupted. Operate the power adapter only on grounded outlets with AC 240V~, 50 Hz. When in doubt about the power type at the location, contact the related power utility company. SAFETY AND SERVICE 1 Do not expose your loudspeakers and all connected devices to humidity. Avoid dust, heat and exposure to direct sunlight to prevent operating failures. Place and operate all components on a stable and flat surface, free of vibrations, to prevent the loudspeakers from tumbling. Provide a suitable ambient temperature: AMBIENT TEMPERATURE The loudspeakers can be operated in an ambient temperature range between 0° C to 40° C and a relative humidity between 20% - 80% (non-condensing). When switched off the loudspeakes can be stored between -20° C and 70° C and at a relative humidity between 20% - 90% (non-condensing). ELECTROMAGNETIC COMPLIANCE The guidelines for electromagnetic compliance (EMC) must be obeyed when connecting. Keep a distance of at least one meter from sources of high frequency or magnetic interference (TV sets, other loudspeakers, mobile phones, etc. ) to avoid malfunction and data loss. SERVICE Please contact our service centre should you experience technical problems with your device. the device has fallen down or the housing is damaged. CLEANING Clean the multimedia active loudspeakers with a damp towel. . 2 SAFETY AND SERVICE DELIVERY CONTENTS Please check, whether the shipment is complete and inform us within 14 days of purchase should it not be. With your multimedia active loudspeakers you receive the following items: 2 multimedia active loudspeakers power adapter this manual warranty documents SPECIFICATIONS Speaker Type Multimedia, active Power adapter KA23D 1400800 16K Input 240V~50Hz Output 14V~ 800mA Connection 3. 5 mm Stereo-jack for Line out / Speaker out SAFETY AND SERVICE 3 DESCRIPTION AND START UP ASSEMBLY INSTRUCTIONS You have to mount the supplied bases to the loudspeakers, before you can use your new active speakers. Please refer to the following drawings. right speaker left speaker 4 DESCRIPTION AND START UP CONNECTIONS AND CONTROLS 5 1 2 3 4 6 7 1234567- On / off switch Status indicator Volume control Sound control AC-in connector 3. 5 mm stereo plug for line-in Connector for the second speaker DESCRIPTION AND START UP 5 CONNECTION TO A SOUND CARD 1. [. . . ] When you are certain, that the supply of power operates flawlessly and that all connections are made, then switch on the computer again. The connection cable of the loudspeakers must be connected to the output of the sound card (Line out or Speaker out). If the sound is distorted or too low, the please adjust the volume control [3] until the desired volume has been found. If you do not hear any sound, then this could be caused by: the speakers are without power the volume control is turned down sound output via the computer is deactivated, muted or faulty (wrong format). You can check the loudspeakers by connecting the connection cable at the earphone output of a CD-ROM drive and playing a music CD. SERVICE 7 DO YOU REQUIRE ADDITIONAL SUPPORT? If the suggestions in the previous section did not solve your problem, please contact us. [. . . ]