User manual MEDION PORTABLE DVD PLAYER MD 80686

[. . . ] The power socket must be freely accessible so that you can unplug the device quickly if necessary. Never undertake your own repairs If the plug, cable or device is damaged, immediately remove the plug from the power supply. If there is a defect contact our Service Centre or other suitable specialist workshop. The device has a safety system that prevents dangerous laser rays escaping from the device during normal use. [. . . ] If necessary switch the DVD player off before connecting the mains adapter. In contrast you can also output images and sounds from other devices on the portable DVD player. Before making connections switch off the power supply to the DVD player and all other devices!You can convert the VIDEO IN/OUT and AUDIO IN/OUT sockets on the side of the device from the default OUT setting (output of AV signals to other devices) to IN. For example, this setting enables you to use the DVD player as a TFT monitor. ⷠPress MODE repeatedly in quick succession until the message is displayed. Use the ­ and + on the main device to make the setting: = AUDIO OUT (the signals are output); = AUDIO IN (the signals are input). Avoid inputting AV signals via the AV sockets if the DVD player is set to AV OUT: This produces interference during ongoing playback. You can connect the DVD player via the digital output to a Dolby Digital/DTS/MPEG2 decoder or an amplifier with integrated decoder. You can use the DVD player in a car by using the car adapter supplied. ⷠConnect the car adapter at one end with the DC IN socket on the main device and at the other with the car's cigarette lighter. You can fix the car bag together with the DVD player as follows to the car seat headrest: Make sure that the device has power (see above). ⷠTo switch on the device hold down the ON button on the main device for around 1. You can also switch on the device from standby mode (the device LED will light up red) using the standby button on the remote control. ⷠInsert the disc with the written side to the front into the disc slot (for discs written on one side). ⷠAs soon as you have inserted the disc far enough the drive will pull in the disc automatically. ⷠTo switch off the device hold down the OFF button on the main device for around 1. There follows a description of the device's button functions using the remote control buttons. 2 PREV/NEXT: During playback press PREV or NEXT to skip forwards or backwards (for DVDs: from chapter to chapter; for CDs: from title to title). Please note that on many DVDs it is not possible to skip over the licensing information at the start. Press once: double speed (2x) press twice: four times speed (2x) press three times: eight times speed (8x) press 4 times: twenty times speed (20x). 4 PLAY: To start playback PAUSE: To pause playback 5/8MENU: You can call up the menus stored on the DVD using the TITLE/PBC and MENU buttons (TITLE/PBC is not available on all DVDs). [. . . ] certain discs contain signals that prevent copying them onto a video cassette. The headphones are connected The main device's volume is too low. Check on the DVD cover or in the DVD menu whether the selected language is actually available on the DVD. All packaging and packaging materials that are no longer required can and should be recycled. [. . . ]