User manual MEDION PORTABLE DVD PLAYER MD 80710

[. . . ] PORTABLE DVD PLAYER Operating Instructions IMPORTANT SAFETY INSTRUCTIONS 1. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. [. . . ] Pressing the SHIFT button to switch from function to number if necessary. 8 REPEAT button REV PLAY/PAUSE FWD STEP/SLOW 5 6 7 8 9 10 MENU TITLE CLEAR C ZOOM REPEAT A-B 16 For DVDs, use this button to play titles or chapters repeatedly. For CDs, use this button to play tracks or the entire disc repeatedly. 9 Press this button during playback to set two points and play the section between them repeatedly. Press this button to display the disc information. A-B REPEAT button SHIFT 10 SHIFT button 11 OPEN 1 AUDIO button Press this button to switch the audio language. Use these buttons to move the cursor up, down, left and right when selecting setting items . 12 SUBTITLE button 2 SETUP button 13 OSD button 3 Cursor buttons 4 ENTER button 14 ANGLE button Press it to switch angle. Clear the numbers inputted before. 15 SEARCH button 16 CLEAR button Press it to enter/confirm setting item. Press it to return back the previous item. 5 RETURN button -20- Parts and Functions Names of battery parts and their functions 1 2 3 4 1 DC IN connector 2 Batter y knob 3 Connect the power adapter to recharge. Twist to tighten/detach the battery pack. When the battery is discharging, LED is off. Supply power to the player. Batter y indicator LED. 4 Player ter minals CAUTION: Do not short-circuit the terminals. -21- Connecting the Player to Other Devices Before connecting Turn off the power of the player and the devices to be connected. Connecting to a TV Video / audio cable (included) VIDEO IN AUDIO IN R L T o video input jack (yellow) T o audio input jack (white) T o audio input jack (red) TV : Signal flow -22- Connecting the Player to Other Devices Connecting to a Dolby Digital / DTS / MPEG decoder or an amplifier with built-in decoder With this player, you can enjoy powerful Dolby Digital, DTS or MPEG sound. Output the digital signals from the player's digital output to a decoder or amplifier with built-in decoder. Main unit left panel See page 22 for details of connections to TV . Optical digital cable (not included) Front speaker (left) Center speaker Front speaker (right) Subwoofer DIGITAL IN (left) Surround speaker (right) : Signal flow Surround speaker Hint: For a compatible decoder or amplifier, 5 speakers (front left/right, center and surround left/right) and a subwoofer are required to enjoy Dolby Digital /DTS 5. 1-channel sound. -23- Connecting the Player to Other Devices Connecting to a digital amplifier that is not Dolby Digital / DTS / MPEG compatible Output the digital signals from the player's digital output to a digital amplifier that is not Doby/DTS/MPEG compatible. Main unit left panel See Page 22 for details of connections to TV . Optical digital cable (not included) To digital audio input jack DIGITAL IN : Signal flow Notes: , Carefully check the player s digital output settings before connecting the player to an amplifier equipped with a digital audio input jack which is not Dolby Digital / DTS / MPEG compatible. Do not play DVDs when the audio settings are not correct. Or may cause strong noise and damage your speakers. -24- Connecting the Player to Other Devices Connecting to active speaker systems Main unit left side Video/audio cable (included) : Signal flow VIDEO IN T o video input jack T o audio input jacks TV Active speaker systems -25- Connecting the Player to Other Devices Connecting ear phone Connect the earphone' s plug securely to the PHONE JACK on the player. To listen to music through the earphone, first use the VOLUME CONTROL on the left side of the main unit to lower the volume to minimum level, then adjust the volume to comfortable level. Be careful not to set the volume to too high level when using earphone. Main unit left side VOLUME Earphone To PHONE jack Notes: Insert the headphone plug securely. No sound will be heard if the earphone is securely connected. Note: It is not possible to hear the sound of DTS-compatible DVDs over earphone. Strong noise is produced when DTS discs are played, so do not listen to such discs through earphone. -26- Using the Battery Recharging the batter y pack Recharging the battery pack as described below. 1 2 1 Connect the DC output plug of AC adapter to the batter y pack. 2 Connect the AC adapter to the power outlet. When recharging starts, the recharge LED lights in red. Recharging usually completes in about 4~5 hours. The battery pack can be used for about 300 cycles of recharging and operations, though this is variable depending on the operating conditions. Charge the battery pack fully before using it for the first time. CAUTION Place the battery pack and AC adapter on a flat surface for recharging. Do not short-circuit the terminals of the battery pack and AC adapter. Notes: The battery charger(AC adapter) is compatible with supply voltage between 100 and 240 V AC and can be used universally. When you want to use it on an overseas travel, however, be sure to prepare a power plug adapter matching the local power outlet. -27- Using the Battery Notes for recharging When the battery pack is hot, it may take longer time than usual for recharging or may sometimes be unusable to be recharged. If the recharge LED can not be lit, check whether the AC adapter and battery pack are connected firmly to have perfect contact. To protect the battery pack, do not recharge a fully charged battery pack repeatedly. The battery pack becomes hot after recharging, but this is not malfunction. [. . . ] Press ENTER to confirm: There are 3 optional audio output modes: SPDIF/OFF, SPDIF / RAW and SPDIF/ PCM. SPDIF/OFF: Choose this setting to output analog signal, and no signal is outputted from optical jack. SPDIF/ RAW: Choose this setting if your DVD player is connected to a power amplifier with a optical cable. When playing a disc recorded with Dolby Digital, DTS and MPEG audio formats, the corresponding digital signals will be outputted from the Optical Output jack. [. . . ]