User manual MEDION RBDS CD MP3 CAR RADIO MD 80555

[. . . ] Push the installation frame into the radio slot in the dashboard of your car. Bend the lugs in the installation frame using a screw driver to firmly fix the frame in the vehicle. connect the aerial cable of the vehicle with the aerial plug of the car radio. Depending on the car model, the matching ISO adapter plugs (counter-pieces in the car) are commercially available. [. . . ] Display Press the DSP/0 button (6) to scan the following information: Programme name Frequency Time (is set automatically with RDS reception) PTY settings (These RBDS functions are broadcast by the radio stations in differing quality and contents. Mode You can switch between radio and CD by pressing the MOD button (18). Reset To reset your car radio to the works settings, press the RESET button (23) using a ball-point pen. Press the RESET button before using the unit for the first time after connecting all the cables, if all the function buttons are not working correctly, if an error message appears in the display. Selecting a station Give the Tune buttons I<< (19) or >>I (21) a short press, and the unit will automatically search for the next station. If you press one of the TUNE button for two seconds, it switches to a manual search for stations. After a short waiting period, the unit switches back into the automatic station-search mode. Preset stations In each wave band up to six stations can be memorised and recalled using the station buttons 1-6 (17). Automatic memory system (AMS) Keep the AMS/MP3 button (12) pressed until you hear a signal sound. The number flashing in the display shows the number of the station key where the corresponding station is to be stored. When the desired station is reached, give the AMS/MP3 button (12) a short press. To select only the alternative frequencies of the desired regional programme keep the AF/REG button (22) pressed for some time until a signal sound will be audible to switch the mode on or off. You can now choose the type of programme your station is to broadcast from the following categories: (The information given depends on the radio station) TA Traffic announcements Press the TA button (9) for a short time to switch the TA mode on or off. When the TA mode is switched on and traffic announcements are broadcast, and the unit has been switched to CD or AUX, the unit is automatically switched to radio reception. The unit temporarily switches to the EON network station, if EON finds a traffic announcement on a different programme. if the TA button (9) is pressed for longer , the EON TA LOCAL / EON TA DISTANCE mode is selected. With this mode it is possible to allocate information to EON TA when you listen for instance to a station without traffic announcements. If there is a traffic announcement on another station frequency the unit automatically switches to this station for this period of time. As soon as the announcement is finished the unit switches back to the previous station. Besides the usual music and text pieces, additional information is broadcast in form of encoded digital signals which can be evaluated by the car radio. When a station is received, the name of the programme and other information is shown on the display (5). Different RBDS services are offered: PI: PS: AF: Program Identification Code The radio can identify the received station using the PI code. [. . . ] Note: If you create MP3 CD-ROM please make sure that the tracks are stored individually or in directories. Never mix tracks or directories since it could lead to problems during the playback. This can be information on the interpreter, track, album name or year of publication of the piece of music or a short comment. This information is shown in the display after the scanning during the playback. [. . . ]