User manual MEDION RDS CAR RADIO MD 7328

[. . . ] MD 7328_AutoradioUK_corrected. fh10 Thu Oct 23 13:50:38 2003 Seite 2 C M Y CM MY CY CMY K SAFETY INSTRUCTIONS Please read this instruction manual carefully, before operating your car radio and retain the manual for future use. Unit mounting location Choose a mounting location where the unit will not interfere with the normal driving functions of the driver. Install the unit where it does not get in the driver´s way and cannot injure any passengers if there is sudden braking, such as an emergency stop. Installation If you want to install the car radio yourself, please read the advice for installation and connection in this manual. CD player The CD player is a Class 1 laser product. The unit is equipped with a safety system that prevents the emergence of dangerous laser beams during normal operation. To avoid injury to the eyes, do not manipulate or damage the safety system of the unit. 3 MD 7328_AutoradioUK_corrected. fh10 Thu Oct 23 13:50:38 2003 Seite 3 C M Y CM MY CY CMY K PANELS AND BUTTON FUNCTIONS Front panel 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Behind the front panel 27 28 29 4 MD 7328_AutoradioUK_corrected. fh10 Thu Oct 23 13:50:38 2003 Seite 4 C M Y CM MY CY CMY K KEY Front panel 1. [. . . ] ->PTY -> - In the case of no receiving CT or PTY information, the display shows as "NO CLOCK" or "NO PTY". - In the case of receiving a non RDS station: in radio mode: ->"NO CLOCK" ->FREQ. ->"NO PTY" -> in CD mode: ->CD(MP3) ->CT ->FREQ. ->"NO PTY" Each display is shown for a few seconds, and then returns to the basic display. 15 MD 7328_AutoradioUK_corrected. fh10 Thu Oct 23 13:50:38 2003 Seite 15 C M Y CM MY CY CMY K OPERATION MUTE Press the MUTE button (14) to mute the sound instantly. If any button is pressed in the mute state, the mute mode is cancelled. When PTY or TA is received, the mute mode is also automatically cancelled. EQUALIZATION Press the EQ button (1) to turn on the equalization function and to select a desired audio EQ mode. There are five modes: FLAT > CLASSIC > POP M > ROCK M > DSP OFF. LIQUID CRYSTAL DISPLAY (LCD) The LCD (7) shows the current frequency and activated functions on the display. RESET The RESET button (6) must be pressed with a thin metal object, e. Carry out a reset in the following situations: - The initial installation of the unit after all wiring is connected. - An error symbol is shown in the display. RADIO OPERATION SWITCHING TO RADIO MODE Press the MOD button (23) briefly to select a radio mode. The radio mode appears in the display together with the radio band and frequency. SELECTING THE FREQUENCY BAND In the radio mode, press the BND/LOUD button (24) briefly to select the desired band. The reception band will change in the following order: FM1 > FM2 > FM3 > MW > LW. 16 MD 7328_AutoradioUK_corrected. fh10 Thu Oct 23 13:50:38 2003 Seite 16 C M Y CM MY CY CMY K OPERATION STATION SELECTION Press the TUNE/ TRACK/ SKIP- (4) or the TUNE/ TRACK/ SKIP+ button (5) briefly to activate the automatic search function. Hold for several seconds to activate the manual tuning mode ("MANUAL" appears in the display). If no buttons are pressed for several seconds, the unit will return to the AUTO searching mode. AUTOMATIC MEMORY STORING AND PROGRAM SCANNING - Automatic Memory Storing Press the AMS button (15) for several seconds. The radio searches the current band and checks signal strengths until the band has been searched completely. The 6 strongest signal stations found are stored in the corresponding preset number buttons. - Program Scanning Press the AMS button (15) briefly to scan preset stations. If the unit finds stronger signal strength stations than those stored, it will store these stronger signal stations instead of the original stations. [. . . ] The unit will show these sorted files and directories by pressing any of the buttons listed in the table below. The unit shows these sorted files and directories by pressing the TUNE/ TRACK/ SKIP/+ buttons. If the selected name is a directory, you can go into the selected directory by pressing the BND/LOUD (ENTER) button and continue to search the the MP3 file name in that directory by pressing the TUNE/ TRACK/ SKIP-/+ buttons. The selected MP3 file can be played by pressing the BND/ LOUD (ENTER) button. [. . . ]