User manual MEDION STEREO CDMP3 SOUND CENTER MD 81919

[. . . ] Only connect the unit to a power point (230 V ~ 50 Hz) that is easy to reach and is close to the place where you have set the unit up. The power socket must be freely accessible so that you can unplug the appliance quickly, if necessary. Do not connect the device immediately to the power supply if the unit has been moved from a cold to a warm room. The device can be operated as soon as the unit has reached room temperature. [. . . ] Unpack the unit and ensure that the following parts are included: NOTE If batteries are inserted at the same time the device is powered from the mains. Please note that the device also uses a little electricity when it is connected to the mains and switched off. We therefore recommend disconnecting the device from the mains when it is not in use. In order to retain the time even if mains power fails, you can insert two 1. Press the DISPLAY/CLOCK button until the hour display flashes on the screen. NOTE The time display flashes when the power supply is restored after failure or pause. In a dark room the brightness of the display is reduced; if the environment is bright, the screen becomes brighter to provide better legibility. Listening to music at a high volume especially when using ear or headphones may result in the loss of hearing. Press the VOLUME + on the remote control or turn the wheel down to increase the volume. press the VOLUME - on the remote control or turn the wheel up to reduce the volume. Select the desired station using the / buttons on the remote control or by turning the setting wheel on the device to the right. In order to find a station automatically, press and hold down the / buttons on the remote control until the device starts the automatic search. NOTE The saved stations are lost whenever the device is disconnected from the mains, the backup batteries are discharged or not inserted. Never insert objects into the CD compartment as this could destroy the mechanism. In order to prevent dust accumulating never leave the CD compartment open for long periods of time. If the CD is very dirty or has clear finger marks playback may be delayed or may start at another location. Dirt on the scanning lens may result in interruptions to playback or other errors. If you want to remove dust particles from the CD compartment simply use a typical blower brush (found in photographic supplies shops). If an audio CD is inserted correctly, the complete number of tracks and the total time for the CD are shown (stop mode). No Disc will be displayed if a CD has not been inserted or the disc cannot be read. The device is now in stop mode and the total number of tracks and any folders on the CD are displayed. While a track is being played you can press to skip to the beginning of the current track. [. . . ] The timer function allows the device to switch itself on and off at a preset time. To set the switch on time, press and hold down the TIMER button on the remote control until ON TIMER is shown and the hour indicator starts to flash. All packaging and packaging materials that are no longer required can and should be recycled. Ask your local or city authorities for options on disposing of the DVD player properly and in an environmentally friendly method. [. . . ]