User manual MEDION TFT DISPLAY MD 30159

[. . . ] 19 Inch TFT Color Monitor Operating Instructions © 2007 All rights reserved. Trademarks: MS-DOS and Windows are registered trademarks of Microsoft . Medion makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Medion shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. [. . . ] To avoid damage of cable do not place any objects or furniture on the cable. · · · · · · · Standards/Electro-Magnetic Compatibility Your monitor fulfils the requirements for electro-magnetic compatibility and electrical safety specified in the following standards: EN 55022, EN 55024, EN 60950, EN 61000-3-2, EN 61000-3-3 UL60950 / CAN CSA 22. 2 No 60950, FCC · · When connecting ensure that Guidelines for Electro-Magnetic Compatibility (EMC) are observed. Provide an interval of at least one meter from high-frequency and magnetic sources of interference (television sets, loudspeakers, mobile telephones, etc. ) in order to avoid malfunctions and data loss. Ergonomics · · · · This monitor complies with all relevant regulations such as DIN EN ISO 9241-3, DIN EN ISO 9241-7 and DIN EN ISO 9241-8. For ergonomic reasons we suggest not to use the base-color blue on dark subfonds. While working with screens you should take breaks periodically to avoid tension and fatigue. In order to save your eyes and to assure a convenient working area you should avoid glare, reflections and strong contrasts on the screen. For more detailed information on workplace ergonomics, see page 9. Safety and Precautions 3 Electrical Safety EN 60950 · · Safety of information technology equipment. The connection of devices is limited to equipment that complies with EN60950 "Safety of information technology equipment" or EN60065 "Audio, video and similar electronic apparatus. / Canadian purposes: The PC should only be connected to equipment which complies with UL 60950 / CAN CSA 22. 2 No 60950 Important Additional Safety Instructions When using any electronic equipment, basic safety precautions should always be taken. Following the guidelines below can reduce the risk of fire, electric shock and injury to person: · · · · · Do not use this product near water (e. g. , near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool). Avoid using a telephone/modem (other than a cordless type) during an electrical storm. Do not use the telephone/modem to report a gas leak in the vicinity of the leak. Keep batteries away from children at all times. FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · · · · Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded interface cables, if any, must be used in order to comply with the emission limits. 4 English Declaration of Conformity According to 47CFR, Parts 2 and 15 for Class B Personal Computers: We: Medion Aktiengesellschaft____________ (Name of the Responsible Party) Located at: Gänsemarkt 16 ­ 18_________________ D-45127 Essen_____________________ Germany__________________________ (Address, City, State, Zip Code) Fax : 0 201 / 81 081 ­ 227____ (Facsimile Number for conformity issues only) Declare under sole responsibility that the product identified herein, complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR §2. 909. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §§15. 101 to 15. 109. [. . . ] 1440 x 900 300 cd/m2 (typ. ) 700:1 (typ. ) 5ms (typ. ) 160°/160° (typ. ) 15-wired SUB-D connector DVI-D ON/OFF, OSD Operating Storage +41°F ~ +95°F +5° C ~ +35°C -4°F ~ +140°F -20° C ~ +60°C < 80% < 95% · · · · · · · · · · Humidity Operating Storage Precautions 17 Copying this manual This document contains legally protected information. Copying in mechanical, electronic and any other form without the written approval of the manufacturer is prohibited. Pixel Defects on TFTs (LCD-Displays) Active matrix TFTs (LCD) with a resolution of 1440 x 900 pixel (WSXGA), which are in turn composed of three sub-pixels each (red, green, blue), contain about 3. 9 million addressable transistors. Because of this very high number of transistors and their extremely complex production process occasionally defective or incorrectly addressed pixels or sub-pixels may occur. There have been several attempts in the past to define the acceptable number of defective pixels. [. . . ]