User manual MEDION TFT DISPLAY MD 30699

[. . . ] 19 Inch TFT Color Monitor Operating Instructions © 2007 All rights reserved. Trademarks: MS-DOS® and Windows® are registered trademarks of Microsoft®. Medion® makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Medion® shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. [. . . ] Shielded interface cables, if any, must be used in order to comply with the emission limits. Declaration of Conformity According to 47CFR, Parts 2 and 15 for Class B Personal Computers: We: Medion Aktiengesellschaft____________ (Name of the Responsible Party) Located at: Gänsemarkt 16 ­ 18_________________ D-45127 Essen_____________________ Germany__________________________ (Address, City, State, Zip Code) Fax : 0 201 / 81 081 ­ 227____ (Facsimile Number for conformity issues only) Declare under sole responsibility that the product identified herein, complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR §2. 909. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §§15. 101 to 15. 109. Trade Name: Type or Model Number: Party Responsible: Executed on (Date), at (Place): Medion MD 30699 PU MEDION AG 7th of December, 2006, Essen SAFETY AND PRECAUTIONS 5 Start-Up Note Before start-up always read the Chapter "Safety and Precautions" on page 1ff. Mounting the Monitor Stand Mount the monitor stand as shown in the diagram. Perform this step before connecting the monitor. (Ill. : Mounting the monitor stand) Preparations on Your Computer If you have operated your computer previously with a CRT monitor, it will be necessary for you to make a few preparations. This is required when your previous monitor was operated with settings which are not supported by your new TFT monitor. Supported Monitor Settings This TFT monitor supports the following modes: Resolution 720 x 400 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 Horizontal Frequency 31. 47 KHz 31. 47 KHz 37. 86 KHz 37. 5 KHz 37. 88 KHz 48. 08 KHz 46. 87 KHz 48. 36 KHz 56. 48 KHz 60. 02 KHz Vertical Frequency 70 Hz 60 Hz 72. 8 Hz 75 Hz 60. 3 Hz 72. 2 Hz 75 Hz 60 Hz 70. 1 Hz 75 Hz 60. 02 Hz 75 Hz *recommended physical resolution 1280 x 1024* 63. 98 KHz 1280 x 1024 80. 00 KHz Display Properties This Windows program offers you the possibility of adapting the display to your monitor. This includes items such as the background image, the screen saver, the Active Desktop (Web) as well as other settings for your monitor and video card. The program can be started as follows: 6 ENGLISH · Right mouse click on Windows desk top and left mouse click on "Properties". Or · Start the "Display" program in "System control". (Ill. : Display Properties) The resolution can be set under "Screen resolution" ( ). TFT monitors achieve complete image quality at the physical resolution. Then click "Color quality" ( ) to set the color depth (number of colors displayed). Your monitor supports a maximum color depth of 16 million colors corresponding to 32 bit or "True Color". A window with the characteristics of your video card appears depending on the configuration of your computer. Under "Adapter" you can change the desired value in the selection field "List All Modes. . . ". (Ill. : Details of Display Properties) Caution!If your setting does not coincide with the values supported by your display, you may not see any image. Switch your old device on again and set the applicable values under "Display Properties" in accordance with the aforementioned options in this case. START-UP 7 Connecting the Monitor To start using the TFT monitor straight away, please read the "Safety and Precautions" section (page 2). We recommend that you also read all the other sections as these contain detailed explanations and tips on how to use your TFT display. Power Power switch supply (Ill. : Rearside connectors) VGA connector DVI-D connector Audio connector · Ensure that the TFT monitor is not yet connected to the line power (power cord not yet plugged in) and neither the TFT monitor nor the computer is switched on. · Prepare your computer for the TFT monitor if necessary with the correct settings for your TFT. Connecting Signal Cable · Plug the data cable into the matching VGA connections on the computer and the monitor. If your PC also has a DVI output, you can connect your monitor by means of the DVI-D connector. Connecting Audio Cable · Plug the audio cable into the matching sockets on the computer and the TFT monitor. Connecting the Power Supply · Plug the power supply cable into the power supply socket of the TFT screen and plug the electric plug into a socket close to the TFT screen (same circuit). · Your TFT monitor has an ON/OFF switch, by means of which you can switch the monitor on or off, on the back. Set the switch to I and next switch your monitor on using the on/off switch. [. . . ] Economic follow-on damage (including lost profit or savings) or associated damage even in the case that we have been informed of the possibilities of this type of damage. In some countries the exclusion or limitation of accompanying or follow-on damage is not legally accepted so that the above limitations do not come into force. Copying this manual This document contains legally protected information. Copying in mechanical, electronic and any other form without the written approval of the manufacturer is prohibited. 22 ENGLISH Pixel Defects on TFTs (LCD-Displays) Active matrix TFTs (LCD) with a resolution of 1280 x 1024 pixel (SXGA), which are in turn composed of three sub-pixels each (red, green, blue), contain about 3. 9 million addressable transistors. Because of this very high number of transistors and their extremely complex production process occasionally defective or incorrectly addressed pixels or sub-pixels may occur. [. . . ]