User manual MEDION TFT DISPLAY MD 30999 PD

[. . . ] DE 19 Inch TFT Color Monitor EN FR NL DK ES IT Operating Instructions © 2007 All rights reserved. Trademarks: MS-DOS and Windows are registered trademarks of Microsoft . Medion makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Medion shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. [. . . ] Your TFT monitor has an ON/OFF switch, by means of which you can switch the monitor on or off, on the back. Set the switch to I and next switch your monitor on using the on/off switch. Then switch on your computer. 8 English Positioning of the Monitor Please ensure that the monitor is set up in such a way that that reflections, glare and light-dark contrast are avoided (as this will make the screen less attractive to look at). DE EN FR NL DK ES IT (Ill. : Monitor positioning) Your posture Sitting in one position for long periods can be uncomfortable. To minimize the potential for physical discomfort or injury, it's important that you maintain proper posture. Back - While sitting at your work surface, make sure your back is supported by the chair's backrest in an erect position or angled slightly backwards. Arms - Your arms should be relaxed and loose, elbows close to your sides, with forearms and hands approximately parallel to the floor. Wrists - Your wrists should be as straight as possible while using the keyboard, mouse or trackball. If necessary, use a footrest, but double check that you have your seat height adjusted correctly before getting a footrest. Overall - Change your position frequently and take regular breaks to avoid fatigue. Start-Up 9 Working Ergonomics (Ill. : Workplace) Hand's support rest: 2" ­ 4" · Top line of screen should keep eye's level or be a little beneath · Eye's distance to screen: 20" ­ 28" · Legroom (vertical): at least 26" · Legroom (horizontal): at least 24" The illustration above should give you a guideline for an ergonomic workplace. · 10 English Controls DE EN FR NL DK ES (Ill. : Front view controls) IT Function Menu/Enter Description When this key is pressed the OSD (ON screen display) starts on your TFT monitor Confirm you selection by pressing this key. Blue = Normal mode, Orange = Stand-by mode Decrease volume Increase volume Auto Power Operation indicator Controls 11 Setting the TFT Monitor You can set certain parameters for the TFT monitor on the OSD menu (ON screen display). How to operate the OSD menu 1. Select the options from the main menu with the function selection keys 3. Select the options from the sub-menu with the function selection keys 5. Set the desired value with the function selection keys / / . . / . Leaving the OSD menu To exit the OSD menu you have different possibilities: · Choose Exit. · The OSD vanishes from the screen automatically, when you do not press any key on the monitor during the preset time interval (factory setting is 10 seconds). OSD Menu The main functions and adjustment possibilities using the OSD are explained on the next pages. (Ill. : OSD menu) Note The setting possibilities for the TFT monitor lead only to marginal changes due to this technology. 12 English Picture DE EN FR NL DK ES IT (Ill. : OSD menu - picture) · · · · · · · Auto adjust Perform an automatic adjustment by means of the MENU key. brightness Adjust the brightness of your TFT monitor with the keys and . The lower the value the denser the display will appear. Setting the TFT Monitor 13 Advanced (Ill. : OSD menu - advanced) · · sharpness Control the sharpness of the picture (only if the resolution is lower than 1280x1024). color Select a general colour temperature: user, natural, warm or cool. Predefined colour settings of the colour components red, green and blue; the colours cannot be adjusted independently of each other. Predefined colour settings of the colour components red, green and blue; the colours cannot be adjusted independently of each other. Predefined colour settings of the colour components red, green and blue; the colours cannot be adjusted independently of each other. · user Allows the independent adjustment of the colour components red, green and blue. 14 English Audio DE EN FR NL DK ES IT (Ill. : OSD menu - audio) · · volume Set the volume of the speakers. mute Disables the speakers. Options (Ill. : OSD menu - options) · · OSD h position Adjust the horizontal position of the OSD. [. . . ] 11 49090 Osnabrück, Germany : +49 (541) 6 05 - 17 43 : +49 (541) 6 05 - 45 17 43 Email: sandra. herzig@de. hellmann. net Website: http://www. hellmann-pm. de Norwegen /Norway Danrec A/S Bogøvej 10 5900 Rudkøbing : +45 6257 1118 : +45 6257 1171 Email: danrec@post8. tele. dk Contact person: Mr. Stig Würtz Dänemark / Denmark Danrec A/S Bogøvej 10 5900 Rudkøbing : +45 6257 1118 : +45 6257 1171 Email: danrec@post8. tele. dk Contact person: Mr. Stig Würtz Slowakei / Slovak Republic Arcon Slovakia s. r. o Syslia 42 821 05 Bratislava Slovak Republic : +421 2 4364 2572 : +421 2 4341 5489 Email: sales@arcon. sk Contact person: Stefan Melo Nederlands / Netherlands Sims Mirec Dillenburgstraat 4 5605 LS Eindhoven : 0031-40-2508800 Email: info@sims-mirec. com Portugal / Portugal Recycling Equipos S. L Poligono Industrial Malpica, calle E. 54-55 50016 Zaragoza : +34 976 573 410 : +34 976 572 354 Email: recycling@moros. com Contact person: Mr. [. . . ]