User manual MEDION UNIVERSAL REMOTE CONTROL MD 4688

[. . . ] They have to be recycled if possible. 3 - + Note: When changing the batteries you have to reprogramme the remote control. Therefore it is useful to write down the code you have chosen in the beginning. - + SETTING UP BY CODE ENTRY Please find the codes for operating your equipment enclosed in the codelist Press the "ON" button to switch on the unit. (If you press the "SETUP" button only once you activate the SHIFT- function). [. . . ] Press the button "OK" briefly to store the code. Note: There are approx. In same cases it can be possible that only the most useful main functions are available. With some special devices the described proceeding cannot work out successfully. The code search starts at the presently stored code number. 5 SETTING UP BY AUTOSEARCH With this function you can find the correct code also automatically: 1. Shortly press the button for the mode you want to operate. (TV, VCR, SAT) 5. If the device doesn't have a channel function press instead of "PROG+" the "PLAY" or "POWER" button. If you missed to press "OK" in the right moment you can go back step by step to the right code by pressing "PROG-" Note: If you wish a larger transmitting interval (3 sec instead of 1 sec) press the "PROG+" ("PLAY", "POWER") button twice in step 5. 6 CODE SEARCHING BY BRAND NAME This function makes it possible to search the code by the respective brand name. (If you press the "SETUP" button only once you activate the SHIFT- function). Shortly press the button for the mode you want to operate (TV, VCR, SAT). Press the button "POWER" or "PROG+" or "PLAY" several times until the device works as desired. Did you run through all codes the mode LED blinks for about 3 seconds. CODE IDENTIFICATION This code identification gives you the possibility to select the stored codes directly with the remote control. (If you press the "SETUP" button only once you activate the SHIFT- function). Shortly press the button for the mode you want to operate (TV, VCR, SAT). If the operating modus is accepted the mode LED goes out for a moment. If the operating modus is accepted the mode LED goes out for an instant. [. . . ] TOGGLE FUNCTION This feature allows the user by pressing the "P<P" button to toggle between two previously stored key sequences containing program numbers*: 1. "TV", "1", "2") beginning with a mode key. Press the "P<P" button a last time The "P<P" key now toggles between "TV 12" and "CD 2" *max. [. . . ]