User manual MEDION UNIVERSAL REMOTE CONTROL MD 4689

[. . . ] April 2005 12:00 12 Programming the device codes The codes of the respective devices can be found in the code list attached to these operating instructions. Briefly press the desired mode key (TV, VCR, DVD, SAT, DSAT, CD, CBL, AUX). Enter the 3-digit code from the code table; the LED turns off each time you press a key. [. . . ] This will give you more time, but the procedure will also take longer. Code search by brand This function provides you with the possibility of searching by brands. You will find the brands in the code table under "Search code under brand name". Briefly press the desired MODE key (TV, VCR, DVD, SAT, DSAT, CD, CBL, AUX). Enter the applicable one-digit code from brand code table , , Search code under brand name". Press the CHAN+ key (or, in case of video cassette recorders, POWER or PLAY) until the device responds correctly. Proceed swiftly when doing this, otherwise the automatic code search will be started. If all codes have been searched, the LED will blink for about 3 seconds. Code identification The code identification allows you to identify codes that you have already entered and that are memorised in the remote control. Briefly press the desired mode key (TV, VCR, DVD, SAT, DSAT, CD, CBL, AUX). To find the first digit, press each number key from 0 to 9 until the LED turns off. The LED will go out as soon as the key for the third number has been pressed. The code identification has now been completed. Learning function The universal remote control provides you with the possibility of manually storing certain special functions which have not been stored, or even devices which have not been included in the code list. To do this, the original remote control of your device is required in any case. However, please note the following tips beforehand in order to avoid any mistakes. · You can assign one remote control to each of the MODE keys. 4 Manual URC 4689 UK Apr05. fm Seite 5 Montag, 11. [. . . ] The selected device will be switched off and the corresponding MODE key will light up. Press the ALL OFF key immediately once again and keep it pressed for approx. The remote control has to be pointed at the devices to be operated until the MODE key goes out. [. . . ]