User manual MEDION UNIVERSAL REMOTE CONTROL MD 83388

[. . . ] Contents Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 General information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Battery instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] (If you select "TV" it is not possible to select a device type because only TV codes can be programmed on the TV mode key. ) Please refer to the list and table above. Perform the function test now by pressing the PROG+, or PLAY (VCR only) keys (up to 350 times) until the device changes channels, switches off or responds accordingly. While the search is running, the word SEARCHING (along with the selected device type) is displayed. If you miss the code, you can go back step by step with the PROG­ key. When the device responds accordingly each time a key is pressed, press OK to save the code. Ireland 1-800-992 508 Web Support www. medion. co. uk Model Number: 83388 13 When all codes for the selected device type are shown, the following message appears: SEARCH END. Code searching by brand name This function gives you the option of searching by brand name. You can find the brand name in the code list under "Code Search by Brand Name". Use the arrows to select the device type to be programmed on this mode key. (If you select "TV" it is not possible to select a device type, because only TV codes can be programmed on the TV mode key. ) Please refer to the list and table above. Press a number key for a required manufacturer according to the following overview: Key 1 = Medion, Tchibo Key 2 = Philips, Radiola, Philco, Erres, Pye Key 3 = Sony, Akai, Panasonic, JVC, Sharp, Toshiba, Daewoo Key 4 = Thomson, Brandt, Fergusson Key 5 = Saba, Nordmende, Telefunken Key 6 = Grundig, Blaupunkt Key 0 = all brands. Perform the function test now by pressing the PROG+, or PLAY keys (VCR only) until the device changes channel, switches off or responds accordingly. While the search is running, the word SEARCHING (along with the selected device type) is displayed. If you miss the code, you can go back step by step with the PROG­ key. Helpline No. Ireland 1-800-992 508 Web Support www. medion. co. uk Model Number: 83388 14 12. When the device responds accordingly each time a key is pressed, press OK to save the code. The remote control returns to normal operation. Code identification If you want to know which code is saved on a particular mode key, simply press this key. Ireland 1-800-992 508 Web Support www. medion. co. uk Model Number: 83388 15 Normal operation Operating individual devices 10 After you have finished programming your remote control for your audio/video devices, the remote control will work in the common main functions just like the original remote control for the respective device. Point your remote control at the desired device and press the relevant mode key. [For the universal functions ­ see Universal functions ("Punch Through") on page 27 ­ you do not need to press the mode key in advance. ] Activate the functions by pressing the corresponding function key on your universal remote control. The symbol for infrared transmission appears each time you press a key. Each time a key is pressed the display backlight switches on for between 10 and 60 seconds (to set this duration please read: "Backlight" on page 8). Please note: In certain circumstances, not every function of your original remote control may be directly available on the universal remote control. [. . . ] All VOL/MUTE commands are programmed on a device type that you select in the next step. Use a mode key to select the device type to which the VOL/MUTE control is to be applied. PLEASE WAIT appears again in the display, followed by the confirmation message SUCCESS. If you selected the wrong device that does not have its own volume control, an error message appears. Helpline No. [. . . ]