User manual MEDION UNIVERSAL REMOTE CONTROL ND 4689

[. . . ] Put it in a safe place, in case you would need to read it again or to give it to a third person. The code of the appliances you wish to control are included in the code list here enclosed. Press and release the mode key of the device you wish to control (TV, VCR, DVD, CD, SAT, AUX). If you entered the code correctly, the LED turns off after the last digit press. [. . . ] Press and release the mode key of the device you wish to control (TV, VCR, DVD, CD, SAT, AUX). Proceed quickly in order to prevent the launching of the automatic search. Press and release the mode key of the device you wish to control (TV, VCR, DVD, CD, SAT, AUX). To identify the first digit press each number button from 0 - 9 until the LED turns 0ff. The MD4689 remote control can stock certain functions which are not included in the entered code, even appliance codes which are not in the code list. Only one appliance code can be stocked per Mode key Point your existing remote at the MD4689 remote (front to front) with a distance of about 5 centimetres between the remotes. When the memory capacity is full, the LED will blink during 3 seconds. Learning a key can take 3 seconds Always check that the MD4689 key you wish to teach a code is free or does not correspond to an important function. No functions may be stored under the following keys: LEARN, SET, ALL 0FF, P<P, SHOWVIEW, and any other MODE key. Experiment by learning 1 code initially (to ensure compatibility) and then clear the stored learned commands before completely learning your original remote's keyboard. Press and release the mode key of the device you wish to control (TV, VCR, DVD, CD, SAT, AUX). Press and release the button on the MD4689 remote which will learn the function. Press the function key on your original remote that you want to transmit. When you're finished learning all the keys, press "SET". Press and release the mode key of the device you wish to control (TV, VCR, DVD, CD, SAT, AUX). Press and release the POWER key to turn off the selected appliance (for ex. Press and release the "ALL-OFF" key The selected device turns off and the Mode key lights on 2. All the preset appliances turn oft one after the other, which can take 3 seconds. The remote control must stay pointed at the appliances, until the Mode key light turns oft. These devices will be switched ON with "ALL-OFF" function, if they were 0FF just before. [. . . ] Example: The last selected appliance is a VCR, but you would like to control the volume of your TV. Press the "Mute" key during 8 seconds about, till the LED turns on a second time Certain keys of the remote control may include a second function. To access to this second function, press and release "SET" key (the LED blinks), then press the key corresponding to this second function. Are the A/V appliances plugged in and turned an · check that the batteries have the correct polarity position in the battery compartment · If the batteries are too weak, change them by new ones. [. . . ]