User manual MEDION USB 2.0 FLATBED SCANNER MD 90070

[. . . ] SAFETY AND SERVICE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Operating safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Point of use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Switch the scanner off, pull the mains part from the socket and remove all connection cables and those supplying electricity. Remove the slide attachment before you secure the scanner, if it is installed. To lock the scanner (for shipping and other reasons), tilt the front-right corner of the scanner to see the locking screw. Next, use a coin to turn the locking screw counter-clockwise until the arrow mark points to the "Locked" position. Do not turn the scanner upside down and attempt to lock the scanner this way; as this may not work. Transport the scanner in the original packaging if possible. 10 SETUP 2. Position the computer and scanner so that you can work with them easily and safely. Connect the supplied power adapter to your scanner as shown in the diagram above. Connect the power adapter to a power socket in close proximity of your flat bed scanner. SETUP 11 Slovenscina Español Français Dansk 1. Observe the notes in chapter "Safety and Service" (page 1). Nederlands English Deutsch 3. CONNECTING TO THE PC Make sure your scanner software has been installed already (see page 9). Switch on the computer and all connected peripheral equipment (monitor, printer, external hard drive, etc. ) and wait until the operating system has booted completely. Connect one end of the USB cable to a free USB connection socket on your computer and the other end to the scanner. The scanner will be recognized and the installation process will be concluded by the operating system. Note: If your operating system is configured so that the installation procedure accepts only signed drivers and software (the default) an information screen will appear. Although the software lacks the digital signature it may still work properly. Click on "Tell me why this testing is important" to get detailed information. Confirm by clicking on "Continue". 12 SETUP OPERATION You will find new Program Groups with various programs and Help files on your computer when the software installation has been concluded. You will also find the installed OCR Program, which will make comprehensive documentation available to you by means of the online help. SCANNING 1. The top of the original should be positioned towards the back end of the scanner with the surface to be scanned facing down. OPERATION Français Dansk English Deutsch PREVIEW SCANNING To launch ScanWizard, double-click the ScanWizard icon on your desktop. By default, the scanner will detect the settings (under Original, Scan Type, and Purpose), and automatically performs a "fast preview" of your image based on those settings. [. . . ] This is not an error massage, but merely a message that the speed will be adjusted, as required by the slower USB 1. 1 connection. TECHNICAL SUPPORT This flat bed scanner has been vigorously tested in our laboratories in conjunction with a wide variety of devices and peripherals. However, it is not unusual, that drivers are updated from time to time. This is due to possible compatibility problems with other components, programs and equipment not yet tested with the flat bed scanner. The latest information on your products and the most current driver updates are available at the following URL address on the Internet: Internet: http://www. medion. com DO YOU NEED ADDITIONAL HELP? Should our suggestions in this manual not solve your specific problem, please contact our helpline. [. . . ]