User manual METABO SBE 850

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual METABO SBE 850. We hope that this METABO SBE 850 user guide will be useful to you.


METABO SBE 850 : Download the complete user guide (5938 Ko)

Manual abstract: user guide METABO SBE 850

Detailed instructions for use are in the User's Guide.

[. . . ] Keep all enclosed documentation for future reference, and pass on your power tool only together with this documentation. 9 10 11 12 13 14 15 4 Special Safety Information For your own protection and the protection of your power tool, observe the passages marked by this symbol!Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. [. . . ] Impact and twist drilling can be done only with a clockwise direction of rotation. 6 Selection of direction of rotation (not for SB 660) Loosen the side handle (16). Set depth stop (4) to the desired drilling depth and retighten the side handle. Due to the electronic soft start the machine accelerates continuously up to the pre-selected speed (SBE 1010 Plus, SBE 85, SBE 850 Impuls, SBE 850 Contact). For continuous operation the trigger can be locked with the lock button (11). If switched on continuously, the machine continues running if it is jerked out of your hands. Therefore, always hold the machine with both hands on the handles, stand safely, and concentrate on your work. 3 Speed preselection (not for SB 660) Do not actuate the rotation selector switch (14) unless the motor has completely stopped. Select direction of rotation: R = clockwise L = counter-clockwise The drill chuck must be firmly screwed onto the spindle and the safety screw inside the drill chuck (if applicable / modelspecific) must be firmly tightened with a screwdriver. 7 Tool change with Futuro Top keyless chuck (3) a Pre-select the max. 4 Gear selection Select the desired gear by turning the control knob (5). Change gears only with the machine coming to a complete standstill (start and switch right off again). Grip the retaining ring (a) firmly and, with the other hand, turn the sleeve (b) against the stop. To open the drill chuck grip the retaining ring 14 17026951_0709 SB_Bauk. Juli 2009 1:54 13 ENGLISH (a) firmly and turn sleeve (b) in the opposite direction. 8 Tool change with Futuro Plus keyless chuck (2) a ENG Removing the tool: Open the geared chuck with the chuck key and remove tool. For drilling into steel girders or steel-reinforced concrete walls, the contact mode can be disabled by pressing the switch button (8). The contact mode indicator (7) shows the current setting: b Insert tool. Grip the retaining ring (a) firmly and, with the other hand, turn sleeve (b) towards GRIP, ZU", until the mechanical resistance which can be felt is overcome. Keep turning (there is a clicking" sound while turning), until further turning is no longer possible only now is the tool securely tightened. When using soft bit shanks, it may be necessary to retighten the chuck after a short period of operation. Opening the drill chuck: Grip the retaining ring (a) firmly and, with the other hand, turn the sleeve (b) towards AUF, RELEASE". [. . . ] *1 Impuls and Contact models: High-energy high-frequency interferences can cause deviations in working speed of up to 20%. The speed returns to normal as soon as the interference has faded away. The technical specifications quoted are subject to tolerances (in compliance with the relevant valid standards). 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Nøkkelchuck * Selvspennende chuck Futuro Plus * Selvspennende chuck Futuro Top * Anslag for boredybde Skifteknapp for valg av gir Skyveknapp for boring/slagboring Indikator for kontaktstatus * Av/På-knapp for kontaktfunksjonen * Innstilli#gshjul for impulsfunksjonen * Elektronisk signalindikator * Sperreknapp Innstilli#gshjul for forhåndsvalg av turtallet* Bryterknapp Dreieretningsomkopler * 7 Før bruk Kontroller før bruk at nettspenningen og nettfrekvensen på typeskiltet stemmer overens med spesifikasjonene for strømnettet. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE METABO SBE 850




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual METABO SBE 850 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.