User manual MINOLTA MAXXUM 7D DIMAGE TRANSFER

[. . . ] The computer and the operating system must be guaranteed by their manufacturers to support USB interface. ABOUT DIMAGE VIEWER / DIMAGE MASTER DiMAGE Viewer or DiMAGE Master can be launched from DiMAGE Transfer. DiMAGE Viewer is installed from the DiMAGE Viewer CD-ROM supplied with the camera. DiMAGE Master is an optional software that has improved editing and processing tools compared with DiMAGE Viewer. To display image files taken with Maxxum/Dynax 7D, DiMAGE Master or DiMAGE Viewer (version 2. 3. 7 or later) must be installed. [. . . ] The update files named "km023. app" and "km023. brd" are created. The files should not be copied into a folder such as the DCIM folder. 3. Confirm that the the update files have been copied to the CompactFlash card using the computer. 4. Disconnect the camera from the computer or remove the CF card from the drive. -6- UPDATING THE CAMERA FIRMWARE When performing the software update, use a set of fully charged batteries or the AC adapter (sold separately). When using the AC adapter, be sure not to inadvertently disconnect the camera during the software updating procedure, otherwise the camera may be permanently damaged. The camera memory and settings are all reset when the update software is installed. When the update confirmation screen appears, select "Yes" and press the central button of the controller to begin the firmware update. When the complete message appears, turn the camera off and remove the CF card. (C) (D) 5. To install the software in the default location (C:\Program Files\DiMAGE Transfer for Maxxum 7D, Dynax 7D), click "Next >. " To install the software in a different location, click the Browse button to display the folder selection window. To install the software icons in this folder, click "Next >. " Installation begins. To install the software icons in another folder, select one of the folders listed in the existing-folders box below. When the software installation has been completed, a message is displayed. If you accept the agreement, click "Yes. " Installation of the USB driver begins. If you do not agree to the terms, click "No" to exit the installation program. - 10 - 11. When the USB driver installation has been completed, a message is displayed. Click "Finish. " UNINSTALLING DIMAGE TRANSFER Windows®XP: 1. Select Start > Settings > Control Panel > Add/Remove Applications. The computer must be on before connecting the camera. (A) LCDbrightness Transfer mode Data storage Video output PTP Audio signals RemoteStorage Language Date/Time set 2. Turn the camera on and select "RemoteStorage" from the transfer-mode option in section 1 of the setup menu (A). Attach the other end of the USB cable to the computer's USB port. The camera should be connected directly to the computer's USB port. A memory card is not necessary. (B-1) (B-2) Windows-logo-testing message (Windows®XP) or Digital-signature-not-found message (Windows®2000 Professional) may appear when the camera is connected for the first time. [. . . ] Confirm that the remaining frames counter displays a dash and the preferences button is active. 2. The preferences window opens. FILE DESTINATION Images are saved in the My Picture folder. Click "View. . . " next to the file destination option to open the folder tree. - 22 - 2. A new folder can also be created in this window. FILE NAME A file name consists of up to 16 alphanumeric characters, followed by a five-digit serial number. [. . . ]