User manual MINOX DC 7022

[. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] The recording time depends on the storage size and the subject of the image to be recorded. The zoom function cannot be used during video recording. When recording a video clip, the flash cannot be used. If the write speed of your SD/SDHC memory card is not fast enough for recording video clips in the currently selected quality, a warning icon [ ] will appear, and then the video recording will stop. In this case, select a video quality lower than the current one. Playing Back Video Clips You can play back recorded video clips on the camera. A press of the / buttons during playback allows fast forward play / fast reverse play. By pressing the shutter button with a movie in pause mode, you can capture a still image from the video. Video clips cannot be displayed rotated or enlarged. EN-26 PLAYBACK MODE Playing Back Still Images You can play back the still images on the LCD monitor. 1. The images can be displayed in forward or reverse sequence with the / buttons. Pressing the / buttons during image playback will result in a 90-degree rotated display. The button rotates the image counterclockwise button rotates the and displays it, whereas the image clockwise and displays it. A press of the button opposite to the direction in which the image was rotated will return the image to the normal display. To return to normal magnification, press the button. 103-0006 An [ ] icon is displayed with the video data. An [ ] icon is displayed with images which have an audio memo recorded. Press the SET button to playback the voice memo data. EN-27 Thumbnail Display This function allows you to view 9 or 16 thumbnail images on the LCD monitor at the same time, which can let you quickly search for the image that you want. 1. Images that have been selected with the / / / buttons will be indicated by a green frame. When there are ten or more images, scroll the screen with the / buttons. Press the / / / buttons to select the image to be displayed at regular size. The selected image is displayed at its regular size. Page Jump Function 1. Press the button to enter page jump function and the image is indicated by a red frame. For page selection, follow the steps below: Pressing the button jumps to the first image. To select the image to be displayed at regular size, follow the steps 3-4 in the above section. Only in the 9-thumbnail mode, an [ ], [ ], [ ], [ ] icon may be displayed in a thumbnail. EN-28 Attaching Voice Memos A maximum of 30 seconds of audio can be recorded as a memo for captured still images. Select the image to which you want to attach the voice memo with the / buttons. To stop recording a voice memo as it is being recorded, press the shutter button again. [. . . ] Even if I press the shutter button, the camera does not shoot. The correct date and time is not set. Set the correct date and time. The free space on the hard disk in Check whether the hard disk has your computer may be insufficient. a space for running Windows, and if the drive for loading image files has a capacity at least that of the memory card inserted in the camera. Recharge the battery. EN-48 Connecting to a Pictbridge Compliant Printer Read this section if the model you purchased is included with the PictBridge functions. If a printer that supports PictBridge is available, images can be printed by connecting the digital still camera directly to the PictBridge-compatible printer without using a computer. [. . . ]