User manual MITSUBISHI 3DC-1000

[. . . ] This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communi- WARNING. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Please check www. mitsubishi-tv. com for updates on 3D signals and safety. 3 Features · · · · Converts 3D video originating in several popular formats to checkerboard format for display on your 3D or 3D-ready Mitsubishi television. Processes side-by-side, top-and-bottom, and frame-packing 3D (e. g. , Blu-ray 3D) formats. Includes two pairs of active-shutter 3D glasses and matching IR emitter. Compatible with these Mitsubishi television models: 3D-Ready Televisions (2007 through 2010) 3D Televisions (starting in 2010) 833 series (2007) C8 series (2008) 735 series (2008) 736 series (2008) 835 series (2008) 738 series (2010) L65-A90 (2008) 737 series (2009) 837 series (2009) C9 series (2009) L75-A81 (2010) 838 series (2010) L75-A91 (2010) 638 series (2010) C10 series (2010) The Mitsubishi 3D Adapter, Model 3DC-1000, may be used to display 3D content only when connected to a Mitsubishi 3D Ready TV or a Mitsubishi 3D TV. [. . . ] Press 3D MODE button to select 3D Mode Normal. Two images, top-andbottom format. Press 3D MODE button to select 3D Mode for top/bottom. Two images, side-byside format. Press 3D MODE button to select 3D Mode for side-by-side. Please check www. mitsubishi-tv. com for updates on 3D signals and safety. 7 3D Glasses 3D active LCD shutter glasses enable you to view 3D images when used with the matching IR emitter and a compatible 3D-ready TV. Power Button Battery Cover LED Indicator LCD Shutter Lens Emitter LED Lit when TV is in 3D mode. Battery Installation · · · Each pair of glasses requires one CR2025 lithium battery. See lithium-battery safety information at the front of this booklet. Open the cover. Remove the old battery if present. Insert a new Close the cover. battery, positive (+) side facing out. For assistance call 1(800) 332-2119 8 Using the 3D Glasses 3D Glasses Operation 1. When the 3D program is complete, turn off 3D mode in the TV and 3D source device and turn off the glasses. On Operating Range Be from 5 to 20 feet away. Press POWER button. Red LED will blink three times. Notes On the 3D Glasses · · · Shut off 3D glasses when not in use to extend battery life. Turning off the TV's 3D mode or changing the TV's input to a 2D input will turn off the IR emitter; the glasses will turn off automatically after two minutes. Moving out of range of the IR emitter for more than two minutes will cause the glasses to turn off automatically. Interference from other IR sources, such as motion detection devices, may cause the glasses to flicker or work intermittently. The IR emitter in this system can also be used with Samsung 3D glasses model SSG-2100AB. Information about these glasses can be obtained from Samsung USA at www. samsung. com/usa/. You can also check www. mitsubishi-tv. com for any updates about compatible glasses. · · · · Please check www. mitsubishi-tv. com for updates on 3D signals and safety. 9 Cleaning Instructions · To avoid scratching the glasses, use only standard glasses lens cleaning cloth, microfiber cloth, or a soft non-scratching cloth such as cotton flannel. Make sure the cloth is clean and free of any foreign material that may scratch the glasses. Cloths pre-moistened with cleaning solutions designed specifically for eye glasses can be used, however, do not spray solutions directly on the glasses. DO NOT spray any cleaner directly onto the any surface of the glasses. This may result in fire, electric shock, damage to the product surface, or removal of control labels. DO NOT use chemicals containing alcohol, solvents, surfactants, wax, benzene, thinners, insect repellents, lubricants, or household cleaners. These may result in discoloration, removal of control labels, or cracks to the product surfaces. · · · Caution · · Do not place the product in a location exposed to direct sunlight, heat, fire, or water. This may result in product malfunction. Troubleshooting If you encounter . Make sure that the distance from the TV to the glasses is less than 20 feet in a straight line. If not, make sure the TV's 3D mode is turned on and the emitter is plugged in. · The LED blinks continually. The battery is drained. [. . . ] Consumable parts such as batteries, 3D Glasses and IR Emitters that were not sold as a part of the Starter Kit (refer to the instructions for the glasses and IR Emitter for warranty details), cosmetic damage or any other damage where such damage is caused by unauthorized modification, alteration, repairs to or service of the product by anyone other than an authorized MITSUBISHI For assistance call 1(800) 332-2119 12 service center; physical abuse to or misuse of the product (including any failure to carry out any maintenance as described in the Owner's Guide or any product damaged by excessive physical or electrical stress); any products that have had a serial number or any part thereof altered, defaced or removed; product use in any manner contrary to the Owner's Guide; freight damage; or any damage caused by acts of God or other factors beyond the reasonable control of MDEA, such as power surge damage caused by electrical system or lightning. This limited warranty also excludes service where no defect in the product covered under this warranty is found, service related to unsatisfactory audio or visual reception or signal unless caused by a defect in the product that is covered under this limited warranty, all costs, expenses or any other damages arising from product installation, or set-ups, any adjustments of user controls (including contrast, brightness, color, tint, fine tuning, sharpness to the connected TV), other adjustment necessary to prepare the unit for display or use, connection with any external audio receiver, antenna, cable or satellite systems, or service of products purchased or serviced outside the U. S. A. Please consult the operating instructions contained in the Owner's Guide furnished with the product for information regarding user controls. ANY EXPRESS WARRANTY NOT PROVIDED HEREIN, AND ANY REMEDY WHICH, BUT FOR THIS PROVISION, MIGHT ARISE BY IMPLICATION OR OPERATION OF LAW, IS HEREBY EXCLUDED AND DISCLAIMED. [. . . ]