User manual MITSUBISHI DIS900D

[. . . ] ID PHOTO SYSTEM DIS900D OPERATION MANUAL CONTENTS Page 1 2 3 4 5 6 7 8 9 SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 5 UNPACKING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PRINTER SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 9 CONNECTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 TAKING A PICTURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 13 PICTURE QUALITY ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 - 19 FEATURES AND FUNCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] (Use W(-) button to increase the value. ) The value decreased from the maximum EXP. Press SET button. 8 9 A Press T(+) or W(-) button to select <BACK to finish the iris setting menu. B Press SET button. 15 ADJUSTING THE COLOR OF IMAGE (WHITE BALANCE) Default setting is flash light W. B. If you are not satisfied with this setting, please proceed as follows. 1 Place a piece of white paper in front of the camera and display it to cover the LCD. Place the white paper at the actual position of a person who is taking a picture from the camera. It is necessary that the picture is a little bit dark, means slightly gray. Also, the back flash should be turned off. a piece of white paper camera actual distance of the person who is taking the picture 2 Take a picture. Press SHOT button. 3 Press CAMERA/PLAY button to switch the camera to CAMERA mode. 4 Press SET button for more than 3 seconds. MENU is displayed. 5 Press T(+) or W(-) button to select WB. 6 Press SET button. The WB menu is displayed. 16 7 Press T(+) or W(-) button to select LOCK and press SET button. LOCK menu appears. 8 Press T(+) or W(-) button to select IN and press SET button. The camera automatically starts adjusting white balance, and completes setting in a few seconds. 9 Repeat pressing T(+) or W(-) button to select <BACK then press SET button to finish the white balance setting menu. 17 FINE-ADJUSTING OF COLOR 1 Press SET button for more than 3 seconds. MENU is displayed. 2 Press T(+) or W(-) button to select COLOR. 3 Press SET button. If B/W button on the camera is pressed, B/W menu is displayed. 4 Press T(+) or W(-) button to select a, b or c, then press SET button. 5 Change the value of each item to get the best color. The changed value is saved. 7 Select <BACK by pressing T (+) or W (-) button, then press SET button. MENU is displayed. 18 8 Select <EXIT and press SET button to go back to CAMERA mode. FEATURES AND FUNCTIONS CAMERA (FRONT) 1 1 2 FLASH SOCKET LENS 2 CAMERA (REAR) 2 1 3 4 57 6 8 9 A B C D 3 T (+) BUTTON Press to zoom up an image or select a menu item. (See page 27. ) 5 B/W BUTTON Press to select the black and white image setting. 7 COLOR BUTTON Press to select the image colour setting between a, b and c. I HGF E 1 SET BUTTON Press for 3 seconds to display MENU. In PLAY mode, use to select the memorized picture. 20 8 PRINT BUTTON Press to print an image. It blinks in red during reading or writing an image in a Compact Flash. In sleep mode, it lights up in orange. 9 C LCD Displays the source image, memorized image, multi mode, color or B/W setting number and memory position. [. . . ] LCD is turned off when any camera operation is not carried out for more than 5 minutes. LCD is not turned off. ON OFF OP SKIP Selects whether the overcoating process on the print is skipped or not. MARGIN CUT Selects whether the margin of the printed paper is cut or not. When you do not connect this system with DPS Click, select OFF. CONNECTING WITH DPS SYSTEM This camera can be connected with DPS Click system by equipping AC adapter (option) as a power supply. CHECKING TOTAL NUMBER OF PRINTS 1 In camera mode, press CAMERA/PLAY button for 3 seconds. [. . . ]