User manual MITSUBISHI DX-PC4U

[. . . ] Remote Operation Software (DX-PC4U) Table of Contents Chapter 1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 1 In This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 2 DX-PC4U Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 3 Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Placing a checkmark in both Send and Receive boxes allows for two-way communication. If the remote DVR sets an audio channel to monitor to be selected from the DX-PC4U system, placing a checkmark in the Receive box displays the following Select Audio Channel dialog box appears. Select an audio channel to monitor and click the OK button. NOTE: Audio communication may not be supported and depends on the specifications of the remote DVR. Sequence Monitoring Clicking the button on the toolbar connects to the registered sites sequentially allowing connection to more than one remote site and displays images from selected cameras. For sequence monitoring to function, the sequence sites should be registered during System setup. Refer to 3. 3 Menu ­ System Menu for details on configuring the sequence site. NOTE: While in the sequence monitoring mode, you cannot manually connect to sites by dragging and dropping with the mouse. 28 Remote Operation Software (DX-PC4U) Additional Functions Color Control Adjust the brightness, contrast, saturation and hue for each camera by clicking the target icons on the Color Control panel. Clicking the icon cancels the image processing operation and reloads the original image. Only the administrator can adjust the image from a remote site. NOTE: It is important that cameras are properly adjusted. These adjustments cannot make up for improperly adjusted cameras when the images are recorded. PTZ Control Select a PTZ camera at the remote site, and control pan, tilt and zoom. Only the administrator can control PTZ from a remote site. NOTE: PTZ control using the mouse is supported. Click the left mouse button on the image and move that image to the direction you want to by dragging the mouse. Roll the mouse wheel to zoom in or out. Alarm Out Control Control alarm out devices on the remote DVRs by clicking the ON or OFF buttons. Only the administrator can control an alarm out from a remote site. NOTE: Not all DVRs support remote control of color, PTZ and alarm out. Refer to your DVR's documentation. 29 User's Manual Save Clicking the button on the toolbar saves the image currently displayed on the screen as a bitmap or JPEG file. By placing a checkmark in the box beside Include Image Info. , text information about the site will be included when saving the image. Print Clicking the button on the toolbar prints the image currently displayed on the screen on a printer connected to your computer. By placing a checkmark in the box beside Include Image Info. , text information about the site will be included when printing the image. 4. 2 Playback and Search DX-PC4U allows you to play back and search recorded images on remote DVRs. It also provides additional functions including zoom, various image enhancements, image saving and image printing. To use remote playback and search functions, the display option must be set to of Search Screen or Watch and Search Screen during System setup. To connect a remote site on the Search screen, select the site or camera you want to connect to in the Remote Site or Favorite Sites panel and then drag and drop it in the desired position on the screen. The remote site connection on the Search screen will automatically be disconnected if there is no activity for a specified amount of time. Click the button on the toolbar or select Disconnect from the System drop-down menu to disconnect the current connection manually. NOTE: Connecting to a Favorite site will be available if the Search Screen display option was set up to connect to selected Favorite sites. Refer to 3. 3 Menu ­ System Menu for more details on Favorite Site setup. [. . . ] DVRNS Use: Select Yes to use DVR Name Service, and the DVRNS field appears. Enter the IP address (or domain name) and the port number of the DVRNS server, and the name of the DVR registered on the DVRNS server. 48 Remote Operation Software (DX-PC4U) NOTE: You should not select numbers that are not supported for devices on the remote DVR when selecting Device No. Otherwise, the map cannot detect the device and it displays the device status as Unplugged. should be from 1 to 16 when the device is connected to a 16-channel DVR. [. . . ]