Detailed instructions for use are in the User's Guide.
[. . . ] VIDEO CASSETTE RECORDER OWNER'S GUIDE
VCR POWER CHANNE EJECT
L VOL UME
TV POWER
MUTE
1 4 7
QUICK PROGRAM
2
CM SKIP
3 6 9
INPUT
5 8 0
PLAY
VCR TV
REW FF
REC PAUSE
STOP
X2
DISPLAY
INDEX
AUDIO /VIDEO
ADJUST CANCEL ENTER VCR/TV
MENU
SP/EP ADJUST
MODEL HS-U748
This Video Cassette Recorder is based on the S-VHS and VHS formats. tapes with the
Special Features HS-U748
SMART: Program Conflict Warning S-VHS and S-VHS ET record/playback VHS Hi-Fi audio record/ playback FAST: Alfa 500 Precision High Speed Mechanism with for 500x rewind/fast forward speed Rental XpressTM Auto rewind, eject and power off for a fast movie return
EASY: ViewPoint® Menu Operating System OTR2 Advanced One Touch Recording with delayed start time Auto Clock Set
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
IMPORTANT:
RECORDING OF COPYRIGHTED TELEVISION PROGRAMS MAY VIOLATE COPYRIGHT LAW.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION:
TO PREVENT ELECTRIC SHOCK HAZARD, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
NOTE TO CATV SYSTEM INSTALLER:
THIS REMINDER IS PROVIDED TO CALL THE CATV SYSTEM INSTALLER'S ATTENTION TO SECTION 820-40 OF THE NEC WHICH PROVIDES GUIDELINES FOR PROPER GROUNDING AND, IN PARTICULAR, SPECIFIES THAT THE CABLE GROUND SHALL BE CONNECTED TO THE GROUNDING SYSTEM OF THE BUILDING, AS CLOSE TO THE POINT OF CABLE ENTRY AS PRACTICAL.
SHORTCUTS
To connect your VCR, go to page 4. [. . . ] IMPORTANT If you press ENTER when you set the timer recording incompletely, Current program is not completed will appear on your screen. If two programmed recording times overlap, VCR is already programmed for that time will display on your screen for about 3 seconds, and then the Recap screen will appear. The program you have just set will be highlighted in magenta color and flash for 3 seconds. The start and stop time of the overlapped program will be highlighted in cyan color. 10 To program additional recording times, select an empty program line by pressing ADJUST buttons. 11 When you are finished with all programming, check the following: · If you have a cable box, leave the cable box turned ON and tuned to the station you wish to record. Additionally, if you are using an A/B switch, remember to set the switch to the correct position. · Turn the VCR power OFF and make sure the programmed recording light is lit. IMPORTANT When programmed recording of 4 and under are entered, only 4 of the 8 program lines appear on the Recap screen at any one time. To see additional program lines, press the ADJUST buttons to scroll the lines on the screen.
¬Program to record CH DAY ON OFF 10 TH14 9:00pm 10:30pm § 2 MO11 11:30am 1:30pm --- ---:---:---- ---:---:-MENU to go back ADJUST to select ¥ENTER to enter ADJUST to select ¬Program to record Channel 2 Day Monday 11 Start time 11:00am Stop time --:-Record speed AUTO MENU to go back ADJUST to select ¥ENTER to enter ADJUST to select
6
7 8
¬Program to record Channel 2 Day Monday 11 Start time 11:30am Stop time 1:30pm Record speed SP MENU to go back ADJUST to select ¥ENTER to enter ADJUST to select
SP SP SP SP
Recap screen
Programming not cancelled
1 4 7 2 5 8 0 3 6 9
STOP
STOP
Canceling a recording in progress
There are two ways to cancel a recording in progress: Press STOP. Programming cancelled
POWER
27
Timer Recording
Changing while programming
7 8 0 9
To change one of your settings (such as start time) while you are programming: Press ENTER to move forward through the program list. You will cancel the entire program if you press CANCEL while the channel number is flashing.
backward
CANCEL
forward
ENTER
ADJUST
adjust
ADJUST
Quick Program
Quick Program is an exclusive Mitsubishi feature that simplifies the process of programming your VCR to record. When you press QUICK PROGRAM on the remote control, you will immediately see the Program to record menu and can begin programming right away. You can use this feature even when the VCR is stopped, playing, fast forwarding, rewinding, or off. (Quick program does not work while a tape is recording. ) 1 Press QUICK PROGRAM on the remote control. After tuning your TV to the correct channel or input, Program to record menu will appear. IMPORTANT If the VCR memory is full, Program memory is full will appear for 3 seconds, and then the Recap screen will appear. If the VCR is stopped, it will turn off and be ready to record your program at a later time. If the VCR is playing, fast forwarding or rewinding, the menus will turn off, but the VCR power will remain on. 3 When you are finished with all programming, check the following: · If you have a cable box, leave the box turned ON and tuned to the station you wish to record. Additionally, if you are using an A/B switch, remember to set the switch to the correct position. · Make sure the VCR is turned OFF and the programmed recording light is lit before the recording time. [. . . ] (MDEA) warrants to the original purchaser of this video cassette recorder if purchased from an authorized MITSUBISHI Audio/Video Dealer that, should it prove defective by reason of improper workmanship and/or material: a. For one year from the date of original purchase at retail, we will repair or replace, at our option, any defective part including the video head without charge for the part. Parts used for replacement are warranted for the remainder of the original warranty period. For ninety days from the date of original purchase at retail, we will provide the labor for a warranty repair without charge at an authorized MITSUBISHI service center. [. . . ]