User manual MITSUBISHI LDT422V

[. . . ] 42" LCD Display Monitor MODEL Index Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . English-2 Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . English-3 Declaration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . English-5 Safety Precautions, Maintenance & Recommended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] (2) Select [RGB3] using the INPUT button on the monitor or the D-SUB button on the wireless remote control. · Connection via RGB4 IN (BNC: R·G·B·H·V, or R·G·B·Csync, RGB sync on green) connector (1) Use a BNC cable (BNC x 5 - BNC x 5) (commercially available) to connect the BNC connector on the PC, and use a signal cable (mini D-SUB 15-pin - BNC x 5) (commercially available) to connect the mini D-SUB 15-pin connector on the PC. (2) Select [RGB4] using the INPUT button on the monitor or the BNC button on the wireless remote control. Second monitor connection: · Connect the RGB OUT connector (mini D-SUB 15-pin) on the first monitor and the RGB3 IN connector (mini D-SUB 15-pin) on the second monitor using an RGB cable (mini D-SUB 15-pin - mini D-SUB 15-pin) (an accessory of the second monitor or commercially available). The RGB1 or RGB2 signal isn't output. ) Audio connection: · Connect an audio cable (ø3. 5 mm stereo mini) (commercially available) to the AUDIO IN1 connector. Select [AUDIO1] using the AUDIO INPUT buttons on the wireless remote control. · To output audio to the second monitor: Connect the AUDIO OUT connector on the first monitor and the AUDIO IN2 or 3 connector on the second monitor using an RCA cable (audio) (commercially available). Personal computer LCD monitor (rear) (Analog RGB) To BNC output BNC cable (BNC x 5 to BNC x 5) RGB cable (Mini D-SUB 15-pin to Mini D-SUB 15-pin) To D-SUB output Personal computer (Analog RGB) RGB4 IN (R, G, B, H, V) To audio output RGB3 IN (D-SUB) AUDIO IN1 (mini) Audio cable (ø 3. 5 mm stereo mini) LCD monitor (first monitor) G B R DVI IN HDMI RS-232C IN VIDEO IN S-VIDEO IN2 IN3 L IN1 OUT R V H D-SUB OUT D-SUB IN RS-232C OUT VIDEO OUT RGB OUT (D-SUB) RGB3 IN (D-SUB) RGB cable (Mini D-SUB 15-pin to Mini D-SUB 15-pin) AUDIO IN2 (RCA) RCA cable (audio) LCD monitor (second monitor) (Multi-connection) English-18 AUDIO OUT (RCA) P-4 Connection procedure (continued) Connecting with a computer (digital connection) Digital connection: · Connection via the RGB1 IN connector (HDMI) (1) Connect an HDMI cable (commercially available) to the RGB1 IN connector. (2) Select [RGB1] using the INPUT button on the monitor or the HDMI button on the wireless remote control. · Connection via the RGB2 IN connector (DVI-D) (1) Connect a DVI-D cable (commercially available) to the RGB2 IN connector. (2) Select [RGB2] using the INPUT button on the monitor or the DVI-D button on the wireless remote control. Audio connection: · Connect an audio cable (ø3. 5 mm stereo mini) (commercially available) to the AUDIO IN1 connector. Select [AUDIO1] using the AUDIO INPUT buttons on the wireless remote control. (You can select HDMI only when the video input is [RGB1]. ) LCD monitor (rear) To DVI-D output DVI-D cable HDMI cable Personal computer (DVI-D, HDMI) To HDMI output AUDIO IN1 (mini) RGB2 IN (DVI-D) RGB1 IN (HDMI) Audio output Audio cable (ø3. 5 mm stereo mini) LCD monitor (first monitor) G B R DVI IN HDMI RS-232C IN VIDEO IN S-VIDEO IN2 IN3 L IN1 OUT R V H D-SUB OUT D-SUB IN RS-232C OUT VIDEO OUT English-19 English P-4 Connection procedure (continued) Connecting a video device (component video/HDMI device) This monitor can be connected to a video device equipped with component output such as a DVD player. (Cables shown in the figure below are commercially available. ) · To connect a DVD player equipped with component output to the DVD/HD IN connector (YPbPr or YCbCr) on the monitor, use a BNC cable (BNC x 3 ­ BNC x 3) and a BNC-RCA adaptor (commercially available), or a signal cable (BNC x 3 ­ D connector). Select [DVD/HD] using the INPUT button on the monitor or the YPbPr button on the wireless remote control. · To make audio connection, connect an RCA cable (audio) to the AUDIO IN2 connector or the AUDIO IN3 connector. Select [AUDIO2] or [AUDIO3] using the AUDIO INPUT buttons on the wireless remote control. · To connect a DVD player equipped with HDMI output to the RGB1 IN connector (HDMI) on the monitor, use an HDMI signal cable. Select [RGB1] using the INPUT button on the monitor or the HDMI button on the wireless remote control. (You can select HDMI audio only when the video input is [RGB1]. ) Signal cable (BNC x 3 to D connector) To D connector output LCD monitor (rear) BNC cable (BNC x 3 to BNC x 3) To video output DVD player (component device) BNC-RCA adaptor Audio output RCA cable (audio) DVD/HD IN (Y·Pb·Pr, Y·Cb·Cr) AUDIO IN2 (RCA) G B R DVI IN HDMI RS-232C IN VIDEO IN S-VIDEO IN2 IN3 L IN1 OUT R V H D-SUB OUT D-SUB IN RS-232C OUT VIDEO OUT DVD player (HDMI device) HDMI cable RGB1 IN (HDMI) To HDMI output English-20 P-4 Connection procedure (continued) Connecting a video device (composite video/S video device)/stereo amplifier This monitor can be connected to a stereo amplifier. (Cables shown in the figure below are commercially available. ) · To connect a video device to the VIDEO IN connector (VIDEO IN or S-VIDEO IN) on the monitor, use a BNC cable or an S video cable. For connection to the audio input connector on the monitor, use an RCA cable (audio cable). [. . . ] For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image. NOTE: As with all display devices, MITSUBISHI ELECTRIC recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use. Image is unstable, unfocused or swimming is apparent · Signal cable should be securely attached to the computer. · Use the OSD Image Adjust controls to focus and adjust the display by increasing or decreasing the fine adjustment. [. . . ]