User manual MITSUBISHI MDT651S

[. . . ] 64. 5" LCD Display Monitor MODEL Before use - Please be sure to read the "Safety Precautions. " They are important to use this LCD display monitor. This document contains instructions for World Wide model and Japan model, but their accessories are different. English Deutsch Español Français Italiano Italiano Français Español Deutsch English Index Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . English-2 Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . English-3 Declaration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 1) Connection to one monitor Computer USB cable (commercially available) CAT5 cable (commercially available) CAT5 Tx BOX (accessory) Monitor The CAT5 video connection function is for transmitting the analog RGB video signal of the computer and the control signal of the monitor over a long distance using CAT5 cables. CAUTION: Never connect network devices (such as a hub and a computer for LAN) to the CAT5 Tx BOX and the IN and OUT connectors of the monitor. If they are connected, the network devices themselves, CAT5 Tx BOX, and monitor may be damaged. Signal cable (Mini D-SUB 15-pin to Mini D-SUB 15-pin) (accessory) 1. Installation of the USB driver for CAT5 serial communication control To connect the computer and the CAT5 Tx BOX via USB interface, it is necessary to install the USB driver to the computer from the CD-ROM supplied with the monitor. (When connecting the computer and the CAT5 Tx BOX via RS-232C interface, you don't have to install the USB driver. ) OS supported: Windows® XP, Windows Vista® How to install: 1) Installation to Windows® XP Start the "PL2303-Driver_XP2K_v ******. exe" file in the Windows XP folder on the CD-ROM supplied with the monitor and install the driver according to the instructions displayed on the screen. 2) Installation to Windows Vista® Start the "PL2303_Prolific_Vista_ ******. exe" file in the Windows VISTA folder on the CD-ROM supplied with the monitor and install the driver according to the instructions displayed on the screen. NOTE: It is unnecessary to install the USB driver if you don't use the communication control or the USB driver. When the window asking you to install the driver is displayed, select cancel. As for the latest driver for the Windows operating system, check the operation of the interface IC "PL-2203" in advance, referring to the website of Prolific Technology Inc. and Mitsubishi don't assume any responsibility or liability for any damages incurred by the user. Operation check by Mitsubishi · File name: PL2303_Prolific_DriverInstaller_v110. zip, Release date: December 2, 2009, Version: V1. 1. 0 Windows XP (32 bits): Operated Windows Vista (32 bits): Operated Windows 7 (32 bits): Operated 1. Connect the USB connector of the supplied CAT5 Tx BOX and that of the computer using a commercially available USB cable. (When the USB driver isn't available, connect an RS-232C cable in addition to the USB cable. In this case, the RS-232C cable serves for supplying the power to the CAT5 Tx BOX. ) See page 36. Connect the RGB input connector (Mini D-SUB 15-pin) of the CAT5 Tx BOX and the D-SUB output connector of the computer using the signal cable (Mini D-SUB 15-pin to Mini D-SUB 15-pin) supplied with the monitor. Connect the CAT5 output connector (Modular connector 8-pin) of the CAT5 Tx BOX and the IN connector of the RGB5/CAT5 input/output connector (Modular connector 8-pin) of the monitor using a commercially available CAT5 cable. 2) Connection to multiple monitors Computer USB cable (commercially available) CAT5 cable (commercially available) CAT5 Tx BOX (accessory) Monitor (first monitor) Signal cable (Mini D-SUB 15-pin to Mini D-SUB 15-pin) (accessory) CAT5 cable (commercially available) Monitor (second monitor) 1. In addition to the connection described in 2-1), connect the OUT connector of the RGB5/CAT5 input/output connector (Modular connector 8-pin) of the first monitor and the IN connector of the RGB5/CAT5 input/output connector (Modular connector 8-pin) of the second monitor using a commercially available CAT5 cable. You can connect up to 5 monitors. English-23 English CAT5 for long-distance connection or multiple-monitor connection 2. Connection of the CAT5 video connection function P-5 Connecting CAT5 (continued) Max. cable length/signal timing 150 m / 1920 x 1080 @60 Hz 200 m / 1920 x 1080 @60 Hz (Total length of the connected cables) Carry out as necessary Allowable cable length Connection One monitor Multiple monitors The lengths given above are based on the actual measurements using our standard signal source and the recommended cable as follows. Before installation, check the monitor operation in advance by connecting it with your computer and cables. [. . . ] NOTE: As with all display devices, MITSUBISHI ELECTRIC recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use. Image is unstable, unfocused or swimming is apparent · Signal cable should be securely attached to the computer. · Use the OSD Image Adjust controls to focus and adjust the display by increasing or decreasing the fine adjustment. When the display mode is changed, the OSD Image Adjust settings may need to be re-adjusted. [. . . ]