User manual MITSUBISHI PD-5010

[. . . ] Owner's Guide Mitsubishi Plasma Display PD-5010 Technically Anything is Possible® Important Information Precautions Please read this manual carefully before using your Mitsubishi plasma monitor and keep the manual handy for future reference. Warnings and Safety Precaution The Mitsubishi plasma monitor is designed and manufactured to provide long, trouble-free service. Never use solvents such as alcohol or thinner to clean the panel surface. Although Mitsubishi produces the plasma display panels with more than 99. 99 percent active cells, there may be some cells that do not produce light or remain lit. For operating safety and to avoid damage to the unit, read carefully and observe the following instructions. [. . . ] Restoring the factory default settings To restore the original factory settings, go back to the MAIN MENU. Note that this also restores other settings to the factory defaults. EXIT RETURN 4. To delete the main menu, press the EXIT button once more. Information CINEMA MODE ON . . . . . . . . . . . . . . . . . . Automatic detection and display of pictures as they originated in the movie. Restoring the factory default settings To restore the original factory settings, go back to the MAIN MENU. Note that this also restores other settings to the factory defaults. 31 Setting MONITORLINK (M-LINK) ADJ. When the picture input from the MONITORLINK input terminal is distorted, select the most appropriate setting from among "1", "2", and "3". Example: Setting "2" Press the MENU/ENTER button on the remote control to display MAIN MENU on the screen, then. . . Use the and buttons to select "FUNCTION", then press the MENU/ENTER button. Use the and buttons to select "M-LINK ADJ. ". MENU Reducing uneven aging of the screen The brightness of the screen, the position of the picture, positive/negative mode and screen wiper are adjusted to reduce uneven phosphor aging of the screen. Example: Setting "PLE" to "LOCK" Press the MENU/ENTER button on the remote control to display the MAIN MENU on the screen, then proceed as follows. Use the and buttons to select "FUNCTION", then press the MENU/ENTER button. Use the and buttons to select "LONG LIFE", then press the MENU/ENTER button. MENU FUNCTION : ON :1 : OFF :3 : ON :1 MENU ADJ. POWER MGT GRAY LEVEL CINEMA MODE M-LINK ADJ. EXIT RETURN LONG LIFE RESET 3. The mode switches as follows each time the buton is pressed: 1 2 3 FUNCTION : ON :1 : OFF :3 : ON :2 SEL. MENU/ENTER OK EXIT RETURN or The "LONG LIFE" screen appears. Use the and buttons to select "PLE". LONG LIFE : AUTO : OFF : OFF : OFF MENU PLE ORBITER INVERSE MENU ADJ. ADJ. SCREEN WIPER EXIT RETURN SEL. ADJ. EXIT RETURN 4. Information NOTE: M-LINK ADJ is available only after proprietary tuner/controller has been connected. Restoring the factory default settings To restore the original factory settings, go back to the MAIN MENU. Note that this also restores other settings to the factory defaults. 4. The mode switches as follows each time the button is pressed: AUTO LOCK LONG LIFE : LOCK : OFF : OFF : OFF or PLE ORBITER INVERSE SCREEN WIPER SEL. ADJ. EXIT RETURN 32 5. The brightness of the screen is adjusted automatically to suit the picture quality. The picture gradually moves around the screen to reduce the impact of uneven aging. [. . . ] Warranty service will be provided in your home or, if required, at an authorized MITSUBISHI service center, provided that your television is located within the geographic territory customarily covered by an authorized MITSUBISHI service center. If not, you must either deliver your television to an authorized service location at your own expense, or pay for any travel and/or transportation costs the service center may charge to and from your home. Proof of purchase date from an authorized MITSUBISHI dealer is required when requesting warranty service. Present your sales receipt or other document which establishes proof and date of purchase. [. . . ]