User manual MITSUBISHI PD-5030

[. . . ] Owner's Guide Mitsubishi Plasma Display PD-5030 & PD-6130 Technically Anything is Possible® IMPORTANT SAFETY INSTRUCTIONS (PD-5030/PD-6130) Read before operating equipment Read these instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A grounding type plug has two blades and third grounding prong. The wide blade or third prong are provided for your safety. [. . . ] Restoring the factory default settings Select "ALL RESET" under the OPTION1 menu. Note that this also restores other settings to the factory defaults. or SEL. ADJ. EXIT RETURN Information GAMMA settings The picture becomes darker as the number increases (in the sequence of 1, 2, 3, 4). Restoring the factory default settings Select "ALL RESET" under the OPTION1 menu. Note that this also restores other settings to the factory defaults. 18 ColorViewTM Use this procedure to adjust hue and color density for red, green, blue, yellow, magenta and cyan. You can accentuate the green color of trees, the blue of the sky, etc. On the MAIN MENU, select "VIDEO SETTINGS", then press the MENU/ENTER button. Use the and buttons to select "COLORVIEW", then press the MENU/ENTER button. ADJ. Audio Settings Menu Adjusting the treble, bass and left/right balance and audio input select The treble, bass and left/right balance can be adjusted to suit your tastes. On the MAIN MENU, select "AUDIO SETTINGS", then press the MENU/ENTER button. Adjust the bass using the and buttons. AUDIO SETTINGS BASS TREBLE BALANCE AUDIO INPUT1 : VIDEO1 AUDIO INPUT2 : HD/DVD1 AUDIO INPUT3 : RGB1 and buttons. COLORVIEW SEL. ADJ. EXIT RETURN : OFF EXIT RETURN To continue adjusting the audio . . . Repeat from step 2. * If neither the or button is pressed within 5 seconds, the current selection is stored into memory and the previous screen reappears. Repeat from step 4. Note : If "CAN NOT ADJUST" appears. . . Restoring the factory default settings Select "ALL RESET" under the OPTION1 menu. Note that this also restores other settings to the factory defaults. Information COLORVIEW settings RED . . . . . . . . . . . . . . . . Use and buttons to select "ON", then press the MENU/ENTER button. Restoring the factory default settings Select "ALL RESET" under the OPTION1 menu. Note that this also restores other settings to the factory defaults. 19 Setting the allocation of the audio connectors Setting the AUDIO 1, 2, and 3 connectors to the desired input. On the MAIN MENU, select "AUDIO SETTINGS", then press the MENU/ENTER button. The mode switches as follows each time the or button is pressed: The available sources depend on the setting of "BNC INPUT". VIDEO1 VIDEO2 VIDEO3 HD/DVD1 MONLINK RGB2 RGB1 VIDEO1 VIDEO2 VIDEO3 HD/DVD1 COMP. : MONLINK RGB1 HD/DVD2 RGB: AUDIO SETTINGS BASS TREBLE BALANCE AUDIO INPUT1 : VIDEO2 AUDIO INPUT2 : HD/DVD1 AUDIO INPUT3 : RGB1 Monitor Settings Menu Adjusting the Position, Size, Fine Picture, Picture Adj The position of the image can be adjusted and flickering of the image can be corrected. On the MAIN MENU, select "MONITOR SETTINGS", then press the MENU/ENTER button. (only for RGB/PC setting) MONITOR SETTINGS ASPECT MODE : NARROW V-POSITION H-POSITION V-HEIGHT H-WIDTH AUTO PICTURE : OFF FINE PICTURE PICTURE ADJ. [. . . ] Proof of purchase date from an authorized MITSUBISHI dealer is required when requesting warranty service. Present your sales receipt or other document which establishes proof and date of purchase. THE RETURN OF THE OWNER REGISTRATION CARD IS NOT A CONDITION OF WARRANTY COVERAGE. However, please return the Owner Registration Card so that we can contact you should a question of safety arise which could affect you. [. . . ]