User manual MITSUBISHI PK10

[. . . ] LED Projector "Pocket" MODEL PK10 User Manual This User Manual is important to you. Please read it before using your projector. EN-1 EN-2 WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS AC ADAPTER'S PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET. NOTE: The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WHEN USING THE AC ADAPTER, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. EN-3 WARNING Only use the attached specified AC adapter and power cord. [. . . ] Images may not be projected in a shape of a regular rectangle or with its aspect ratio 4:3, depending on the installation conditions of the projector and the screen. To correct vertical keystone distortion: On the optional remote control: press the KEYSTONE buttons. In the following cases: Press the KEYSTONE . Press the KEYSTONE . EN-18 Important: When the keystone adjustment is carried out, the adjustment value is indicated. The allowable range of the adjustment value in the keystone adjustment varies depending on the installation conditions. In addition, stripes may appear or straight lines may bend in images with complicated patterns. Noise may appear on the screen during the keystone adjustment because of the type of the video signal being projected and the setting values of the keystone adjustment. In such cases, set the keystone adjustment values in the range where the image is displayed without noise. When the keystone adjustment is carried out, the image may not be displayed correctly because of the type of input signal. EN-19 Basic operation On the control panel 3 4 3 Power-on 1. The CHARGE indicator lights up when the projector connects with a not fully charged battery. Press the POWER button either on the control panel or the remote control. Turn off the projector, wait for one minute and then turn on it again. After the POWER button is pressed, the image may flicker before the lamp becomes stable. This is not a product malfunction. Indicator Condition LAMP (Green) Stand-by. On POWER (Red) On Off EN-20 COMP Hi-Bright UTER AUTO POSIT ION VI DE O Still Computer Video Important: Images may not be projected with good quality in an extremely hot or cold environment. Choose your desired external input source using the COMPUTER / VIDEO buttons. Adjust the image size by changing the distance between the projector and the screen. Caution: The air outlet fan rotates faster as the temperature around the projector rises. Power-off Use the following procedure to turn off the projector. Do not turn off the projector by unplugging the power cord while the lamp is on. Unplugging while the lamp is on degrades the lamp's performance and causes failure in the projector. Press the POWER button either on the control panel or on the remote control. The CHARGE indicator will go out if a not fully charged battery is connected with the projector. Important: In case the system has frozen or hung up for whatever reason and the system has stopped responding, you may shut off the system by holding down the POWER button either on the control panel or on the remote control for 5 seconds. EN-21 On the remote control KEYSTONE button Press the KEYSTONE or KEYSTONE to adjust image distortion caused by tilting the projector. Important: Keystone adjustment is available for the keystone distortion in a slant angle of +15 degrees. [. . . ] 1 lb (0. 45kg) 100-240V AC 50/60 Hz 72. 8 inch + 72. 8 inch (1. 85m + 1. 85m) +41°F (+5°C) - +95°F (+35°C), maximum 85% EN-35 Video compatibility I/O Connectors Outside dimensions Weight AC adapter input Length of power cord Temperature, humidity (performance guaranteed) The specifications and outside appearance of the projector are subject to change without prior notice. Kensington Lock This projector has a Kensington Security Standard connector for use with Kensington MicroSaver Security System. Refer to the information that came with the Kensington System for instructions on how to use it to secure the projector. Kensington Technology Group 2855 Campus Drive San Mateo, CA 94403, U. S. A. Phone : +1- (650)572-2700 Fax : +1- (650)572-9675 Dimensional drawings (unit : mm) 25. 7mm 22. 8 mm 48. 2 mm 123. 0 mm 97. 0 mm 123. 0 mm EN-36 97. 0 mm 48. 2 mm COMPUTER AUTO POSITION VIDEO What's included in the box 1 Soft Carrying Bag P6439-3000-00 1 CD ROM (User manual) P6439-A001-00 1 Quick Reference Guide P6439-4001-00 1 Composite Video Cable 02552-0075-00 1 AC Adaptor 02550-0112-00 1 Power Cord US 02552-0078-00 EU 02552-0083-00 UK 02552-0079-00 It depends on different counties or areas, only 1 cord is included. [. . . ]