User manual MITSUBISHI SD220U

[. . . ] EN DATA PROJECTOR MODEL SD220U User Manual This User Manual is important to you. Please read it before using your projector. ENGLISH CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. NOTE: SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. WARNING Use the attached specified power supply cord. If you use another power supply cord, it may cause interference with radio and television reception. [. . . ] When COLOR ENHANCER is switched, projected images may be distorted. EN-19 ENGLISH Menu operation (continued) 2. INSTALLATION menu Menu option Setting OFF/BEIGE / LIGHT BLUE / LIGHT GREEN / PINK / BLACK BOARD/WHITE BOARD STANDARD Feature description Selects a desired setting based on the color of the screen or wall on which images are projected. (See page 15. ) When selecting a setting other than BLACK BOARD/WHITE BOARD, you can fine-tune the color tone to the desired level on the 1 to 5 scale. Select this setting when you want to view images at a moderate light intensity. The operating sound is consequently reduced, and the lamp lifetime becomes longer. · If this mode is frequently switched, the lamp may be deteriorated. When this mode is set to ON, the lamp is automatically lit when the power cord is plugged in the wall outlet. Selects a desired timer setting until the projector enters the standby mode when there is no signal input from the source. Select ON to display the splash screen when the projector is powered on. Selects the background color that is displayed when there is no signal input from the source. Select this setting when you want to view images from the front with the projector set on the floor. Select this setting when you want to view images from behind the screen with the projector set on the floor. Select this setting when you want to view images from behind the screen with the projector set at the ceiling. Select this setting when you want to view images from the front with the projector set at the ceiling. Resets LAMP TIME. opt. INSTALLATION WALL SCREEN LAMP MODE AUTO POWER ON AUTO POWER OFF ON WALL SCREEN BEIGE STANDARD OFF OFF ON BLUE OFF OK SPLASH SCREEN BACK COLOR IMAGE REVERSE LAMP TIME RESET LAMP MODE LOW AUTO POWER ON ON/OFF AUTO POWER OFF SPLASH SCREEN BACK COLOR OFF/5-60 min ON/OFF BLUE/BLACK OFF MIRROR IMAGE REVERSE INVERT MIRROR INVERT LAMP TIME RESET OK · By default, the LAMP MODE is set to STANDARD. The LAMP MODE is set to either STANDARD or LOW depending on the setting last selected, and you cannot switch the LAMP MODE in about one minute after the lamp is on. EN-20 Menu operation (continued) 3. FEATURE menu Menu option Setting NORMAL ASPECT Feature description Automatically sets the aspect ratio in relative to the input signal. Selects a desired screen position for anamorphically squeezed or horizontally compressed images stored on DVD disks. You can select from CENTER, UPPER, and LOWER by pressing the ENTER button. Select this setting when you want to project images in the full screen. Select Auto to automatically activate the film mode when the input video signal is a video signal from a film. Select Auto to automatically set the appropriate video format in relative to the input signal. [. . . ] Blinking green/red Off Close the cover correctly. Steady or Blinking green/red Blinking Abnormal. Contact your dealer. EN-31 Specifications Type Model Rated power supply DLPTM DATA projector SD220U 100 - 240 V AC, 50 / 60 Hz 2. 6 A During standby : AC 100-120 V : 0. 4 W AC 220-240 V : 0. 5 W 0. 55-inch Single chip Digital Micromirror Device (DMD) Pixels 800 x 600 = 480000 pixels 16770000 colors F 2. 5-2. 7, f = 22. 0 - 24. 2 mm 180 W 30 - 300 inch (aspect ratio 4:3) Resolution:640x400 (Expand) - 800x600 (Real) - 1280x1024 (Compress) Sync on Green available NTSC / NTSC 4. 43 / PAL (including PAL-M, N) / SECAM / PAL-60 Component Video (DVD/HDTV) (480i, 576i, 480p, 576p, 1080i, 720p) 2 W Mono, Round type ø2. 5 cm x 1 1. 0 Vp-p 75 (negative sync. ) 350 mVrms, 10 k or more RGB: 0. 7 Vp-p 75 (negative sync. ) YPBPR/YCBCR : Y:1. 0 Vp-p (negative sync. ) HD/CS : TTL level (positive or negative) VD : TTL level (positive or negative) Serial terminal (RS-232C) (Mini DIN) 320 x 104 x 236 mm (width x height x depth) Approx. 3. 2 kg 114 inch (1. 8 m) +41°F (+5°C) - +95°F (+35°C), 30 - 90% Power consumption Display Technology Colors Projection lens Light source lamp Picture size PC compatibility Video compatibility Speaker Video input Audio input Analog RGB input PBPR/CBCR:0. 7 Vp-p Control connector Outside dimensions Weight Length of power cord Temperature, humidity (performance guaranteed) · The specifications and outside appearance of the projector are subject to change without prior notice. EN-32 Specifications (continued) Connectors COMPUTER IN (Mini D-SUB 15-pin) IN pin No. R(RED)/CR G(GREEN)/Y B(BLUE)/CB GND GND GND GND GND DDC5V GND GND DDC Data HD/CS VD DDC Clock 11 15 6 10 1 2 1 5 3 4 5 6 7 8 9 10 11 12 13 14 15 Dimensional drawings (unit : mm) What's included in the box AC power cord for US J2552-0063-01 for EU J2552-0066-01 for UK J2552-0065-01 J2552-0072-03 1 1 1 2 1 Remote control Safety Manual/Quick Start up CD-ROM Battery Soft case 1 RGB cable for PC Replacement part (Option / Not included in the box) Spare lamp for SD220U VLT-XD221LP EN-33 ENGLISH Specifications (continued) Specification of RGB signals in each computer mode of the projector Signal mode TV60, 480i (525i) TV50, 576i (625i) 1080i 60 (1125i 60) 1080i 50 (1125i 50) 480p (525p) 576p (625p) 720p 60 (750p 60) 720p 50 (750p 50) CGA84 CGA85 VGA60 VGA72 VGA75 VGA85 SVGA56 SVGA60 SVGA72 SVGA75 SVGA85 XGA60 XGA70 XGA75 XGA85 SXGA70a SXGA75a WXGA60 WXGA60a WXGA60b WXGA60c SXGA60b SXGA60 MAC13 MAC16 MAC19 HP75 SUN66a SUN76a resolution (H x V) 640 x 400 640 x 400 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1152 x 864 1280 x 768 1280 x 800 1360 x 768 1366 x 768 1280 x 960 1280 x 1024 640 x 480 832 x 624 1024 x 768 1024 x 768 1152 x 900 1152 x 900 horizontal frequency (kHz) 15. 73 15. 63 33. 75 28. 13 31. 47 31. 25 45. 00 37. 50 37. 86 37. 86 31. 47 37. 86 37. 50 43. 27 35. 16 37. 88 48. 08 46. 88 53. 67 48. 36 56. 48 60. 02 68. 68 63. 85 67. 50 47. 77 49. 70 47. 71 47. 50 60. 00 63. 98 35. 00 49. 72 60. 24 62. 94 61. 85 71. 81 vertical frequency (Hz) 59. 94 50. 00 60. 00 50. 00 59. 94 50. 00 60. 00 50. 00 84. 13 85. 08 59. 94 72. 81 75. 00 85. 01 56. 25 60. 32 72. 19 75. 00 85. 06 60. 00 70. 07 75. 03 85. 00 70. 01 75. 00 59. 87 59. 81 60. 01 59. 75 60. 00 60. 02 66. 67 74. 55 75. 02 74. 92 66. 00 76. 64 SD220U (H x V) 800 x 600 800 x 600 800 x 450 800 x 450 800 x 600 800 x 600 800 x 450 800 x 450 800 x 500 800 x 500 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 480 800 x 500 800 x 451 800 x 449 800 x 600 750 x 600 800 x 600 800 x 600 800 x 600 800 x 600 768 x 600 768 x 600 *1 *1 *1 *1 *2 *2 *2 *2 *2 *2 *2 *2 *2 *1 When you input the signals WXGA60, WXGA60a, WXGA60b, or WXGA60c, select the supported image size from WXGA of the FEATURE menu. *2 The partial enlargement feature is not supported. Important: · · · · · Some computers aren't compatible with the projector. [. . . ]