User manual MITSUBISHI WD-62627

[. . . ] Projection Television Models WD-52627, WD-62627 Owner's Guide TM TM TM TV Information: Use this space to record the model and serial numbers of your television. This information is on the back of your TV Model number Serial number visit our website at www. mitsubishi-tv. com CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of uninsulated "dangerous voltage" within the product's enclosure that may be sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This TV is heavy! [. . . ] Device icons that are grayed out are not available for use as PIP sources or with the current source. Video Section Device Section To select another device or input, press ADJUST on the TV's remote to move the highlight. If NetCommand is set up, the inputs on compatible A/V receivers are automatically changed at the same time. Video Section The destination of the device highlighted in the Device Section is displayed here as a TV icon. Connection Section The Connection Section shows the recording in progress and the device that is recording from the source. For example, if the Digital VCR (D-VCR) is currently recording, when you move the highlight to the Ant-1 icon, the D-VCR icon will appear in the Connection Section. This icon will disappear when you move the highlight to another icon, press CANCEL to stop recording. Device Section Figure 8. PIP Device Selection Menu IMPORTANT If a device does not respond to separate On or Off remote control signals, the manufacturer has not provided that ability for the device. Chapter 4. IEEE 1394 Devices and NetCommand-Controlled Recordings 57 Using the Device Menu Button to Display Menus Device Menu If the input is a VCR or DVD, and NetCommand is set up, the first press of DEVICE MENU displays the transport menu of the current device. Another press of the DEVICE MENU button will display menu for the current device source, if available. then press ENTER to access the linked page. Pressing DEVICE MENU will return to the CableCARD menu screen and pressing HOME will return to TV viewing. The screen shown is an example of the type of screen that may display. If there are technical problems with the CableCARD, an error screen will automatically display with information that may be needed by your Cable provider when you call them for assistance. Moving Through Other CableCARD Screens In addition to CableCARD menus, other CableCARD application screens may display and require you to make additional selections. While CableCARD application screens are customized in each area, some general rules apply in using these screens on your Mitsubishi television. When screens do not have blue text, there are no more links. Figure 9. Transport menu When used with the TV Guide On Screen, DEVICE MENU displays or removes TV Guide's menu information. See the TV Guide On Screen Interactive Program Guide User's Manual for detailed information. IR Controlled Devices For a NetCommand compatible traditional IR controlled device, pressing DEVICE MENU once or twice will display the menu for that device. While the menu for the device is displayed, press ADJUST and ENTER to navigate the screen. For some NetCommand traditional devices you will also be able to use the number buttons and other additional buttons on the TV remote. For traditional DVD players, DEVICE MENU is also known as the setup menu. 2. If you want to exit the CableCARD system, press HOME to exit and return to TV viewing. [. . . ] This technology creates the image using small dots, or picture elements (pixels). Your DLP Projection TV is manufactured to a high level of performance and quality, in fact, 99. 99% perfect in the number of properly functioning pixels. As in other display technology, sometimes a pixel is continuously active, inactive or the incorrect color. Our standard is clear; MDEA warrants only that the percentage of properly functioning pixels will be not less than 99. 99% of all pixels. [. . . ]