User manual MITSUBISHI WD-73727

[. . . ] WD-52628 WD-62628 WD-73727 Projection Television Owner's Guide TV Information Use this space to record the model number and serial number of your television. Model Number Serial Number Purchase Date TM visit our website at www. mitsubishi-tv. com CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of uninsulated "dangerous voltage" within the product's enclosure that may be sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. [. . . ] Device Section To select another device or input, press ADJUST on the TV's remote to move the highlight. If NetCommand is set up, the inputs on compatible A/V receivers are automatically changed at the same time. Video Section The destination of the device highlighted in the Device Section is displayed here as a TV icon. Connection Section The Connection Section shows the recording in progress and the device that is recording from the source. For example, if the Digital VCR (D-VCR) is currently recording, when you move the highlight to the Ant-1 icon, the D-VCR icon appears in the Connection Section. This icon disappears when you move the highlight to another icon or press CANCEL to stop recording. The PIP Selection menu displays when you press the PIP DEVICE button on the remote control. The source for the Video Section is the sub picture and the Audio and Connection Sections are not available. Use ADJUST to move the highlight to the device to show in the PIP or POP screen, then press ENTER. Device icons that are grayed out are not available for use as PIP or POP sources or with the current source. Video Section Device Section Figure 2. PIP Device Selection Menu IMPORTANT If a device does not respond to separate On or Off remote control signals, the manufacturer has not provided that ability for the device. 58 Chapter 4. Netcommand Functions Using the Device Menu Button to Display Menus Device Menu If the input is a VCR or DVD, and NetCommand is set up, press DEVICE MENU once to display the transport menu for the current device (figure 3). Press DEVICE MENU a second time to display the menu for the current device source, if available. screen shown is an example of the type of screen that may display. If there are technical problems with the CableCARD, an error screen will automatically display with information that may be needed by your Cable provider when you call them for assistance. Moving Through Other CableCARD Screens In addition to CableCARD menus, other CableCARD application screens may display and require you to make additional selections. While CableCARD application screens are customized in each area, some general rules apply in using these screens on your Mitsubishi television. When screens do not have blue text, there are no more links. Figure 3. Transport menu When used with the TV Guide On Screen, DEVICE MENU displays or removes TV Guide's menu information. See the TV Guide On Screen Interactive Program Guide User's Manual for detailed information. IR Controlled Devices For a NetCommand compatible traditional IR controlled device, pressing DEVICE MENU once or twice will display the menu for that device. While the menu for the device and ENTER to is displayed, press ADJUST navigate the screen. For some NetCommand traditional devices, you will also be able to use the number buttons and other additional buttons on the TV remote. For traditional DVD players, DEVICE MENU is also known as the setup menu. 2. [. . . ] To obtain a replacement lamp during the warranty period, please contact the MDEA Consumer Relations Department at (800) 332-2119. After the warranty period you may order the lamp directly from the MDEA Parts Department at (800) 553-7278. Up to . 01% pixel outages (small dot picture elements that are dark or incorrectly illuminated). Damage to the lenticular screen or Fresnel lens, screen frame, cosmetic damage or to any other damage where such damage is caused by unauthorized modification, alteration, repairs to or service of the product by anyone other than an authorized MITSUBISHI service center; physical abuse to or misuse of the product (including any failure to carry out any maintenance as described in the Owner's Guide including air filter cleaning or any product damaged by excessive physical or electrical stress); any products that have had a serial number or any part thereof altered, defaced or removed; product use in any manner contrary to the Owner's Guide; freight damage; or any damage caused by acts of God or other factors beyond the reasonable control of MDEA, such as power surge damage caused by electrical system or lightning. [. . . ]