User manual MITSUBISHI WL-82913

[. . . ] Connections and Maintenance Owner's Guide Book 1 WL-82913 visit our website at w w w. m i t s u b i s h i -t v. c o m CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of uninsulated "dangerous voltage" within the product's enclosure that may be sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ] Use and to select each letter, then press ENT(er) to move to the next position. Press CANCEL to delete the current letter and move back one character position. When in the first position, the CANCEL button will return the name to the default name. Figure 19. Connection for [Device] screen VCR for Recordings Screen Figure 20 This screen allows you to select the VCR you would like to use for recording. You may also select whether you want the recorded 16:9 signals from Ant-DTV or IEEE-1394 devices to be cropped (sides are cut off) or Anamorphic (full screen). If Anamorphic is selected for viewing, choose the Standard format for the best quality playback. Figure 18. VCR for Recordings screen 28 Edit NetCommand®, Adding Devices, continued Please refer to the Setup Guide on page 20 to see if the screen described below is necessary for your device setup. RF Connection for Cable Screen Figure 21 Input-DTV Connection Screen Figure 23 The RF Connection screen displays only when Adding or Changing a Cable Box. If your Cable Box is connected to a TV Antenna input, make sure the RF checkbox is checked. If the Cable Box is also connected to a VCR for recording, select that VCR. If your Cable box is connected using Audio/Video cables, make sure the RF checkbox is unchecked. Then the next screen will be Connection (Figure 19) to allow the selection of the TV input used with the Cable Box. This screen displays only if the device selected in the Connection screen (Figure 19) is connected to Input-DTV. The Input-DTV Connection screen allows you to select the connection type, RGB (HV) or Component YPbPr you are using to connect your cable box or DBS. Figure 23. RF Connection for Cable screen IR Code for [Device] Screen Figure 24 Fixed Channel Screen Figure 22 If the device being connected is a cable box and the "RF" box (Figure 21) is checked, the Fixed Channel screen allows you to select the channel number used for output by your cable box. The Fixed Channel screen allows you to select the channel number that is used for output by your cable box. The default channel is 003. This screen only displays if an added device has the same IR code as a previously added device of the same type and manufacturer. For example, for the second Mitsubishi VCR you can specify the IR Code setting to VCR-B, if the primary Mitsubishi VCR is using the VCR-A IR code. Figure 24. Fixed Channel screen 29 Edit NetCommand®, Change or Delete Devices, Finish Screen Change Figure 25 Finish Screen Figure 27 Selecting Change from the Setup menu screen, displays the Change screen. You can change the name or input connections to the TV and A/V Receiver. If "Other" is selected for the manufacturer then you can also "Learn". The rest of the screens that follow are the same as when you Add a device. To finalize your selections and complete the NetCommand setup, select Finish from the Finish screen. Note: To change any of the inputs or names for the devices, or add devices not in included in the initial settings, select Edit to display the Edit NetCommand menu. Figure 27. Change screen Delete Figure 26 Selecting Delete at the Setup menu, displays the Delete screen. [. . . ] This license is effective until terminated, and will terminate immediately without notice from MDEA or judicial resolution if you fail to comply with any provision of this License. All title and intellectual property rights in and to the Software (including but not limited to any images, photographs, animations, video, audio, music, text, and "applets" incorporated into the Software), and any accompanying printed materials are owned by or licensed to MDEA. All title and intellectual property rights in and to the content which may be accessed through use of the Software is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties. This License Agreement grants you no rights to use such content, except that you own the media on which the Software is recorded, but MDEA and its licensors retain ownership of the Software itself. [. . . ]