User manual MITSUBISHI WS-55711

[. . . ] AD JU ST Projection Television Models WS-B55 WS-48511 WS-55511 WS-55711 WS-65511 WS-65611 WS-65711 WS-65712 WS-73711 Owner's Guide visit our website at w w w. c o m CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of uninsulated "dangerous voltage" within the product's enclosure that may be sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Warning: To avoid permanently imprinting a fixed image onto your TV screen, please do not display the same stationary images on the screen for more than 15% of your total TV viewing in one week. [. . . ] Use the CH or or number buttons to select the channel you want to add to the current SQV memory bank. When "SQV" and the memory bank number appear under the channel number, the channel has successfully been added. SQV (SuperQuickViewTM) allows you to put together lists of your favorite channels from Ant-A, Ant-B and Ant-DTV. Once you have added a channel to an SQV memory, when tuned to the channel "SQV" (and the memory bank number) will appear under the channel number on the TV screen. Adding SQV Channels 1. Select the channel using the "Channel" option box or CH or button. 4. Repeat for additional channels or banks. Removing SQV channels using the remote control: 1. While the channel number and SQV indicator (with correct bank number) are still displayed on the screen, press the CANCEL button. If the CANCEL button is not pressed before the SQV indicator disappears automatically, the channel will not be removed. When the SQV indicator disappears, the channel has successfully been removed only from that bank. Press ENTer to remove the check mark. 47 Clock Menu: Auto or Manual Clock Setting (Figure 1) Clock Setting (Auto) The Clock Setting (Auto) will automatically set the day and time using Extended Data Service (XDS) time data. This data is automatically retrieved from a PBS channel or other channel carrying this service when received on Ant-A or Ant-B. Some channels may send incorrect time information; this is not a defect in the TV. Figure 1. Clock Menu (Auto) Time Zone (Figure 1) (Figure 2) Set Time When Auto has been selected for the Clock Setting, you need to select the correct time zone. Use ADJUST or to select the time zone (Atlantic, Eastern, Central, Mountain, Pacific, Alaska, or Hawaii) for your area. Then use ADJUST to move to the Daylight Savings Time option. When manual has been selected for the clock setting, you need to set the time. Then use to move to the "Set Day" option. (Figure 1) Daylight Savings Time When Auto has been selected for the Clock Setting, you need to select the Daylight Savings Time (DST) option that your state uses. Use Adjust or to select Applies if your state or area uses DST, or Ignore if your state or area does not use DST. The clock time and day will be set automatically after tuning to a channel carrying the Extended Data Service (XDS) time data (usually your local PBS channel). Figure 2. Clock Menu (Manual) (Figure 2) Clock Setting (Manual) For the manual clock setting, select the current time, including AM or PM and the day. (Figure 2) Set Day When Manual has been selected for the Clock Setting, you need to select the current day of the week. Use or to select the correct day. 48 Captions Menu: Analog and Digital Captions Background To make the analog closed captions easier to read, you can choose to display the background color as either black or gray behind the captions. If you use Closed Captions frequently, Mitsubishi recommends gray for the background to prevent uneven aging of the picture tubes. Note: See page 70 for information concerning uneven aging of picture tubes. Figure 1. Captions menu Figure 1 Captions Menu On analog channels (Ant-A or Ant-B), broadcasters can send either Standard or Text closed captioning. [. . . ] This License Agreement will be governed by the laws of the State of California. 88 Notes 89 Notes 90 Connection: Helpful Hints Q My VCR (or other device) does not have two sets of stereo audio outputs; how can I connect this device's audio to both the TV and the A/V Receiver? A. Use the Edit NetCommandTM feature to "Change" the setup of this device. In the Connection screen part of "Change" make sure both audio and video for the TV input are check marked and neither the audio or the video for the AVR input are check marked. This will allow the NetCommandTM system to use the TV outputs to transfer the device's audio to the A/V Receiver. [. . . ]