User manual MITSUBISHI WS-65815

[. . . ] Projec t ion Television Owner's Guide WS-55815 WS-65815 TM TM TV Information: Use this space to record the model and serial numbers of your television. m i t s u b i s h i -t v. c o m CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of uninsulated "dangerous voltage" within the product's enclosure that may be sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This TV is very heavy! [. . . ] Finish screen 47 IEEE 1394 Devices Compatibility Compatible IEEE 1394 Devices It is possible to connect devices to the TV that have IEEE 1394 connectors but are not compatible with the TV or with the NetCommand® control system. These incompatible devices may not appear on the Device Selection menu or in the Review screen of the Edit NetCommand menu. 1. Other types of digital video, such as DV video provided by some camcorders, must be decoded by the source device and sent to the TV as analog video or S-Video. If the camcorder uses a compatible digital control system, the IEEE 1394 cable can still provide control for the camcorder while the TV is viewing the analog video or S-Video signals. NetCommand Control of Digital Devices Using the "Learn" Feature. When received with video signals, the TV is able to decode Dolby Digital signals and MPEG Audio signals. Other types of digital audio as provided by some digital recording devices, such as MP3 Audio and DTS Audio, cannot be decoded by the TV when received over IEEE 1394. The TV may not be able to pass incompatible digital audio signals on the coaxial digital audio output, however these signals may pass on the IEEE 1394 cable to other devices. 2. Digital Audio Signals Some IEEE 1394 devices such as cable boxes or satellite receivers will not have compatible digital control signals or require the use of the device's own remote control. Some of these IEEE 1394 devices will not display on-screen information through the IEEE 1394 connection and will require using an analog connection for on-screen displays. In many cases, to control these digital devices, the Learning feature of NetCommand can be used. 1. Place an IR Emitter for NetCommand in front of the device's remote control sensor (see IR Emitters, page 22). On the Name for 1394 Device screen (Figure 2, page 46) check mark the Analog Connection check box. Select the device type on the IEEE 1394 Device Type screen (Figure 3, page 47) of cable box, DBS or similar tuning device. Select "Other" as a manufacturer and then highlight "Learn" and press ENTER on the Device screen (Figure 4, page 47). Follow the device learning instructions found in Edit NetCommand section of Chapter 3. The Connection screen (Figure 5, page 47) follows the learning screens. If non using analog connections, uncheck the audio and video connections for both the TV and AVR inputs. This will allow NetCommand to use the learned remote control signals to control these IEEE 1394 devices. Note: When using the NetCommand learning feature for IEEE 1394 devices that do not have analog connections, the GUIDE function will require pressing GUIDE twice. The second press will display the program guide for the device, if an IEEE 1394 guide is available. The TV is able to act as the control center for IEEE 1394 audio/video devices, such as VCRs, A/V Discs, tuners, cable boxes and amplifiers that are compatible with the following IEEE 1394 control standards. · EIA-775 is designed for tuning devices such as cable boxes allowing the device to send simple graphics. However, this standard does not allow the TV to control the cable box by IEEE 1394. · AV/C (Audio Video Control) is designed to provide basic controls such as play, stop, channel selection and volume, as appropriate for the device. [. . . ] The Software is protected by United States copyright laws and international treaty provisions, as well as other intellectual property laws and treaties. MDEA grants you a non-exclusive, non-transferable, limited right and license to use one copy of the Software only with the Mitsubishi television model that included this owner's guide and owned by you. You may not resell or otherwise transfer for value the Software, except in conjunction with a sale of the TV that Software has been preinstalled. The Software contains trade secrets or other proprietary material in its human perceivable form and to protect them, you may not reverse engineer, decompile, or disassemble, or otherwise reduce the Software to any human perceivable form, except to the extent that the foregoing restriction is expressly prohibited by applicable law. [. . . ]