User manual MTD GRASS CATCHER FOR LAWN TRACTORS 700, 900, RT99

[. . . ] Before installing the grass catcher, park the lawn tractor on a level surface, apply the parking brake, switch the engine off and remove the spark-plug terminal. Check your model number so that you know which installation steps to perform. Identification of the model number: You can find the rating plate under the driver's seat. [. . . ] Insert the bolt (E2) through the mounting holes and secure the bolt with the cotter pin (G2) ­ Fig. Push the support plate (I) into the recess on the grass catcher bag carrier (J) and secure the support plate on the grass catcher carrier using a bolt (B2) and nut (C2) (Figs. Now hook the pre-assembled part into the mounting frame on the tractor between the 2 lugs and secure the part on the mounting frame using a bolt (A2) and nut (C2) (Figs. Install the tube holder (F) by clicking it onto the tubular frame of the grass catcher bag carrier (Fig. Note: In Step 1 ensure that the edge of the tube holder is flush with the red line on the tubular frame. Push the long end of the cover all the way into the recess of the hood (Fig. Now press the other end of the cover into the designated recess (2) in the hood (Fig. Now position the hood on the mounting eyelets of the tubular frame (Fig. To do this, push the bolt (K) through the first mounting eyelet and then continue through the second mounting eyelet until the end of the bolt touches the hood (Fig. Note: To facilitate installation, use the inspection opening (1) in the hood (Fig. [. . . ] Open the hood and push the pipe end section (H) onto the intermediate piece and align it until the lower retaining groove (1) is situated firmly in the tube holder (2) (Fig. Inspect the installation and perform a function test. Operating the grass catcher: Emptying · · · · · Switch off the unit. [. . . ]